← Back to Machine List

MCM ATL HP HEAVY PLUS CNC Heavy-Duty Flat Bed Lathe 3 Meters – Year 2019

MCM ATL HP HEAVY PLUS CNC Heavy-Duty Flat Bed Lathe 3 Meters – Year 2019
Ø above the bed 1250 mm
Ø above transversing slide 900 mm
Length between centers 3000 mm
Type of CNC FAGOR
Max workpiece weight 10000 kg
Spindle taper ASA 15
Number of turrets 2
Number of tools on turret 12
Turning speed 1000 rpm
Spindle motor power 37 kW

C.N. FAGOR
Tip height: 625 mm
Distance between centers: 3000 mm
Turning diameter on the bed: 1250 mm
Turning diameter on the slide: 900 mm
Bench width: 755 mm
Allowable weight without bezels: 10000 kg
Fast axis motion: 9 m/min
Spindle: ASA 15
No. 2 speeds
1st range 0 – 350 rpm
2nd range 351 – 1000 rpm
Power 37 Kw
Turret: Automatic 4 positions
Turret: Automatic 12 positions
Tailstock: CM 6
Tailstock Ø 160 mm stroke 300 mm
Bezel: Ø 100 – 590 mm
Manual platform Ø 800 mm
N.2 Chip conveyor evacuators

Technical Specifications 500 625 700 800
Height of centres mm 500 625 700 800
Swing over bed mm 1000 1250 1400 1600
Swing over cross slide mm 650 850 1000 1200
Distance between centers mm 1.5-2-3-4-5-6-7-8-9-10-11-12-13-14-15-16
Bed width mm 755
Number of guideways N. 3 (2+1)
Bed structure Monolithic
Spindle bore mm 130
(Opt. 160 – 360)
Spindle nose Asa A2-15
Speed ranges (Automatic) N. 2
Spindle speed range rpm 0:800
Main motor power (S6/S1) Kw 56/37
(Opt. 72/55)
Cross slide travel mm 700 800
X-Z axis rapid traverse m/min 8
Tailstock quill diameter mm 300
Tailstock quill travel mm 200 Rotating quill
Tailstock quill taper Morse 6
Max. weight between centers Kg 10000
CNC Mod. Fagor
(Fanuc / Siemens / Heidenhain)
Weigth 500 625 700 800L
Weight of the lathe of 3000 mm (D.B.C.) Kg 16500 16900 17300 17700
Each additional meter Kg +2000

Standard equipment

  • NC FAGOR or SIEMENS or FANUC or HEIDENHAIN
  • Beds – Headstock – Tailstock – Carriages made of cast iron
  • Monolithic structure
  • Bottom supporting guideway (3° guideway)
  • Automatic speed change gear box Baruffaldi with mechanic ratio 1:4
  • Induction hardened and ground guideways with hardness 50-55 HRC
  • Spindle line supported by high accuracy bearings
  • Carriages are sliding on antifriction material
  • High accuracy ground and certified ballscrews on X & Z (up to DBC 5000 mm); from DBC 6000 mm the longitudinal carriage movement is made by hardened and ground rack with inclined teeth, double pre-charged pinion and n. 2 servomotors
  • Electric plant with low voltage control panel; it is placed in a suitable airtight cabinet. Make of components is Siemens and/or Schneider
  • Automatic lubrication controlled by NC
  • Enclosure with front sliding doors and work area lighting with led lamps
  • Control programming panel, screen and handwheel mounted on a moving orientable arm (to place it on the best position for operator)
  • Telescopic protections of cross slides
  • Safety protections according EC standards
  • Chip tanks on wheels
  • Cooling system with electropump.
  • Safety microswitch (to prevent collision) for X axis, Z axis and tailstock
  • End-stroke for X/Z axis and tailstock
  • Steady rest
  • Tailstock with rotating quill
  • Power displacement of tailstock along bed
  • 3 Colours lighting
  • Heat exchanger (for oil cooling in the headstock)
  • Portable electronic handwheel
  • Set of service tools and wrenches – Manual – NC programming manuals – Machine built according to EC standards

Optional equipment

  • Hydraulically or pneumatic operated chucks
  • Manual self-centering chucks
  • 4-independant jaw chuck
  • Manual turret
  • Automatic 4 position turret
  • Automatic 8/12 position disc turret
  • Automatic powered disc turret with 8/12 positions
  • “C” with continuous movement by using the main motor or an independant motor.
  • “Y” Axis
  • Hydraulically operated tailstock quill movement
  • Tailstock with hydraulically operated locking/unlocking of tailstock base long bed
  • Chip conveyor
  • Hydraulically operated steady rest
  • Steady rest with larger Ø than standard
  • Roller support steady for heavy loads
  • Follow rest
  • Boring bar support assembled on carriage
  • Grinding unit
  • Milling unit
  • Handwheels placed on carriage like on manual lathes
  • Air conditioner on electric cabinet
  • Mist suction system
  • Tool control probe
  • Workpiece control probe
  • Optical pressurized linear scales on X & Z axis

Want to see machine photos and full commercial details?

View Full Machine Details