Mazak VTC-300C-II CNC Vertical Machining Center – Year 2002
| Specification | Value |
|---|---|
| Manufacturer | Mazak |
| Model | VTC-300C-II |
| Year of Manufacture | 2002 |
| Machine Type | CNC Vertical Machining Center |
| CNC Control | Mazatrol PC Fusion CNC 640M |
| Programming | Mazatrol Conversational & EIA / ISO |
| Table Size | 2,000 × 760 mm |
| Table Load Capacity | 1,400 kg |
| X-Axis Travel | 1,740 mm |
| Y-Axis Travel | 760 mm |
| Z-Axis Travel | 660 mm |
| Spindle Speed | 12,000 rpm |
| Spindle Motor | 18.5 kW |
| Spindle Taper | BT40 / CAT40 |
| Automatic Tool Changer (ATC) | 30 Tools |
| Rapid Traverse (X/Y/Z) | 36 m/min |
| Coolant Tank Capacity | 365 L |
| Coolant Pump Flow Rate | Approx. 24 L/min |
| Coolant Pump Pressure | Approx. 5 bar |
| Power Supply | 400 V / 50 Hz |
| Connected Load | 32.8 kVA |
| Operating Voltage | 400 V / 50 Hz |
| Operating Air Pressure | 5.4 bar (540 kPa) |
| Required Air Flow | Approx. 145 L/min (ANR) |
| Machine Weight | Approx. 10,500 kg |
| Floor Space | Approx. 5,400 × 3,400 mm |
| Standard Equipment | |
| CNC Control | Mazatrol PC Fusion CNC 640M |
| Adaptive Feed Control (AFC) | Included |
| Adaptive Vibration Control (AVC) | Included |
| Tool Breakage Detection | Included |
| Automatic Tool Length Compensation | Included |
| Rigid Tapping | Included |
| Helical Interpolation | Included |
| Coordinate System Rotation | Included |
| 3D Coordinate Rotation | Included |
| Workpiece Counter | Included |
| Coolant System | Included |
| Spindle Cooling | Included |
| Chip Flush System | Included |
| Foundation Bolts & Plates | Included |
| Machine Documentation | Included |
Mazak VTC-300C-II CNC Vertical Machining Center – Year 2002
| Specification | Value |
|---|---|
| Manufacturer | Mazak |
| Model | VTC-300C-II |
| Year of Manufacture | 2002 |
| Machine Type | CNC Vertical Machining Center |
| Condition | Used |
| Functionality | Limited Functionality |
| CNC Control | Mazatrol Fusion 640M |
| Operating Hours | 47,961 h (Approx. 50,000 h) |
| X-Axis Travel | 1,740 mm |
| Y-Axis Travel | 760 mm |
| Z-Axis Travel | 840 mm |
| Number of Spindles | 1 |
| Spindle Taper | SK40 (BT40) |
| Maximum Spindle Speed | 12,000 rpm |
| Automatic Tool Changer (ATC) | 30 Tools |
| Tool Magazine | 30-Position Automatic Tool Magazine |
| Table Size | 2,000 × 760 mm |
| Maximum Table Load | 1,400 kg |
| Rapid Traverse (X / Y / Z) | 36 m/min |
| Coolant Tank Capacity | 365 L |
| Coolant Pump Flow Rate | Approx. 24 L/min |
| Coolant Pump Pressure | Approx. 5 bar |
| Electrical Supply | 400 V / 50 Hz |
| Connected Load | 32.8 kVA |
| Compressed Air Requirement | 5.4 bar / Approx. 145 L/min |
| Machine Weight | Approx. 10,500 kg |
| Floor Space | Approx. 5,400 × 3,400 mm |
| Included Equipment | |
| Chip Conveyor | Included |
| Renishaw Work Probe | Included |
| Tool Holders | Included (Set) |
| Documentation / Manuals | Included |
| Infinitely Variable Spindle Speed | Included |
| Coolant System | Included |
| Rigid Tapping | Supported |
| Helical Interpolation | Supported |
| Adaptive Feed Control (AFC) | Included |
| Adaptive Vibration Control (AVC) | Included |
| Machine Notes | |
| Technical Status | One electrical power component is defective due to severe weather. Apart from this issue, the machine is ready for operation. |
| Reason for Sale | Machine is being sold due to lack of production orders. |
