| Manufacturer |
Matsuura |
Matsuura |
| Model |
VX-1000 |
VX-1000 |
| Machine Type |
CNC Vertical Machining Center |
CNC Vertical Machining Center |
| Year |
2013 |
2013 |
| Manufacturing Date |
October 2013 |
October 2013 |
| Number of Axes |
3-Axis |
3-Axis |
| CNC Control |
FANUC FS31iB |
FANUC FS31iB |
| X-Axis Travel |
1,016 mm |
40 in |
| Y-Axis Travel |
609.6 mm |
24 in |
| Z-Axis Travel |
609.6 mm |
24 in |
| Maximum Table Loading Capacity |
Approx. 499 kg |
1,100 lb |
| Spindle |
Maxia Spindle (New) |
Maxia Spindle (New) |
| Maximum Spindle Speed |
20,000 rpm |
20,000 rpm |
| Tool Taper |
BIG-PLUS / CAT 40 |
BIG-PLUS / CAT 40 |
| Tool Magazine Capacity |
30 Tools |
30 Tools |
| Tool Magazine Type |
Drum-Type Tool Carousel |
Drum-Type Tool Carousel |
| Automatic Tool Changer |
Twin-Grip ATC with Tool Management System |
Twin-Grip ATC with Tool Management System |
| Through-Spindle Coolant |
Approx. 20.7 bar capable |
300 psi capable |
| Through-Spindle Air Blow |
Yes |
Yes |
| Spindle Chiller |
Included |
Included |
| Data Server Package |
Included |
Included |
| Look-Ahead Function |
1,000-Block Look-Ahead |
1,000-Block Look-Ahead |
| High-Speed Machining Features |
MMU Package and Nano Smoothing |
MMU Package and Nano Smoothing |
| Chip Augers |
Twin Under-Table Chip Augers with Coolant Washdown |
Twin Under-Table Chip Augers with Coolant Washdown |
| Chip Conveyor |
Lift-Up Chip Conveyor |
Lift-Up Chip Conveyor |
| X-Axis Ball Screw |
New Ball Screw Assembly |
New Ball Screw Assembly |
| X-Axis Linear Ways |
New Linear Ways |
New Linear Ways |
| Approximate Run Hours |
25,332 Hours |
25,332 Hours |
| Cutting Time |
21,564 Hours |
21,564 Hours |
| Machine Status |
Under Power |
Under Power |
| Manuals |
Included |
Included |
| Previous Application |
Used exclusively for aluminum vacuum mold machining |
Used exclusively for aluminum vacuum mold machining |
| Typical Machining Cycle |
Approx. 24 to 100+ hours per mold |
Approx. 24 to 100+ hours per mold |
| Typical Finishing Tool |
Approx. 1.19 mm Ball End Mill |
3/64 in Ball End Mill |
| Previous Machine Load |
Very Light Load – Primarily Aluminum Finishing |
Very Light Load – Primarily Aluminum Finishing |
| Spindle Operating Characteristics |
Maxia spindle designed for continuous high-RPM operation without overheating |
Maxia spindle designed for continuous high-RPM operation without overheating |
| Overall Condition |
Used – Reported to be in very nice condition |
Used – Reported to be in very nice condition |
