LICO LNC 65 CNC Gang Lathe – Year 2004
FANUC 0ITB CONTROL
Put in new Bearing on X ,Z machine side and Spindle head
CAPACITIES
Collet bar capacity , dia. (through bore)
mmØ65
Max. swingmmØ260(010.2″)
Max. turning diameter(3-jaw power chuck) mmØ195(07.7″)
collet mm 300(1 1.8″)
Max. turning length
3-jaw power chuck mm 254(10″)
SPINDLE
Height of spindle center (approx.) mm 1000
Spindle nose ISO A2-6
Collet chuck type F72
Power chuck reception inch8
SPINDLE DRIVE
AC motor cont. output KW 7.5(10HP)
Maximum torque Nm 95
Max. spindle speed rpm 4000
SLIDE
Cross travel (X-axis) 300
Longitudinal travel (Z-axis) 300
Resolution mm 0.001
TOOL TURRET
Number of tool positions 12
Turning tool section mm 020 (03/4″”)
Boring tool reception mm 025 (01″)
SERVO MOTORS
Working feeds , X-axis and Z-axis, stepless
mm/min 0~10000
Rapid traverses .X-axis and Z-axis, stepless
m/min 10/15(option)
Feed force 100% duty factor , X-axis kg/cm 32.6(0.83 kW)
Feed force 100% duty factor , Z-axis kg/cm 56.1(1.4 kW)
SPACE REQUIREMENTS AND WEIGHTS
Overall dimension (L x W x H)
mm 1870 x 1440 x 1650
Approx.net weights of machine with electronic cabinet kg 2000
Hydraulic tank capacity liters 40
Hydraulic pump motor kW 0.75
Coolant tank capacity liters 150
Coolant pump motor KW 0.25
Lubrication capacity 2 L,6c.c/12min
Total power required KVA 28
Under power..have memory backed up incase it gets lost.
