LDSA WJAII 40.30 1T 5X Waterjet – Year 2011
| Metal length | 4000 mm |
|---|---|
| Metal width | 3000 mm |
| Nbr of heads | 2 |
| Max thickness | 150 mm |
| Working pressure | 3000 bar |
| CNC | Yes |
| Type of CNC | FANUC |
| Power | 22388.0597 W |
| Sand recuperation | Yes |
| Length x width x height | 5300.0 × 4100.0 × 1900.0 |
| Weight | 5200 kg |
| Worked hours | 29993 hours |
LDSA WJAII 40.30 1T 5X – 2011 Model
Useful strokes: 4000 x 3000 mm in Y and X with:
1 worktop in vertical “S” slats and stainless steel jets recovery tank and perforated grids on the bottom of the tank allowing the collection of offcuts that have fallen into the tank.
1 mobile carriage, X axis controlled by the CNC and mobile beam, Y axis controlled by the CNC.
1 vertical Z axis with 200 mm stroke controlled by the NC, including flatness control system (probe).
1 nozzle filter 20 µm.
1 Abrasive Active IDE II cutting head with diamond nozzle mounted on a support with hour meter and display.
1 Abraline III pressurized abrasive feed system with a capacity of 400 kg.
1 Feedline V type intermediate hopper mounted on a mobile trolley with abrasive dispenser (accuracy +/- 5%) with flow rate adjustment controlled by the CNC, abrasive lack detection and clogging detection.
1 FANUC – 31IA5 brand digital control, new generation OPEN version, flash memory, all digital technology with digital variator and brushless motor.
Light protection barrier by photocell.
Programming software not included.
Option:
laser pointer
2nd abrasive head on aluminum beam.
Manual center distance adjustment: 800mm max
Addition of SEBA SIMPLE Pump LB80, including set of rods for 6m² (sludge extraction system)
Replacing the pump with a new BFT + software update to Windows 7:
ECOTRON 3800 bars 37kw pump with integrated oil / air cooler (1087 hours as of 10/26/2020)
Pump set at 3000 bars for reliable operation.
Low pressure operating problem.
