| Konrad Seidler MINIMAX 1800 CNC Vertical Lathe C Axis – Year 2013 |
| Manufacturer |
Konrad Seidler Maschinenbau GmbH |
| Model |
MINIMAX 1800 |
| Machine Type |
CNC Vertical Turning, Drilling & Milling Center |
| Year of Manufacture |
2013 |
| Condition |
Fully Functional, General Overhauled |
| Ownership |
First Owner |
| Availability |
Immediately Available |
| Location |
Freudenberg, Germany |
| Control System |
| CNC Control |
Siemens 840D SL |
| Drive System |
SINAMICS 120 |
| Turning Capacity |
| Turning Diameter Range |
500 – 1,270 mm (19.69″ – 50.00″) |
| Faceplate Load Capacity |
6,000 kg (13,228 lbs) |
| Faceplate Speed |
5 – 500 RPM |
| Milling / Drilling Spindle |
| Spindle Motor Power |
30 kW (40.2 HP) |
| Maximum Torque |
190 Nm (140 lb-ft) |
| Standard Spindle Speed |
2 – 2,500 RPM |
| Maximum Spindle Speed |
6,000 RPM |
| Tool Taper |
HSK100 |
| Tool Changer |
| Tool Magazine Capacity |
16 Tools |
| Coolant System |
| Standard Coolant Pressure |
6 bar (87 PSI) |
| High-Pressure Coolant |
30 bar (435 PSI) |
| Chip Handling |
| Chip Conveyor |
Left Side Cross Conveyor |
| Chip Discharge Height |
1,200 mm (47.24″) |
| Machine Dimensions |
| Machine Weight |
Approx. 22,000 kg (48,502 lbs) |
| Machine Enclosure |
Walk-In Working Area with Double Sliding Doors |
| Equipment |
- Turning, Drilling & Milling in One Machine
- Siemens 840D SL CNC Control
- SINAMICS 120 Drive Technology
- 16-Station Automatic Tool Changer
- HSK100 Tool Interface
- 6,000 kg Faceplate Capacity
- 5–500 RPM Faceplate Speed
- Milling Spindle up to 6,000 RPM
- 30 Bar High-Pressure Coolant System
- Chip Conveyor
- Walk-In Machining Area
- Extensive Machine Documentation
|
| 2025 Spindle Overhaul |
- Complete overhaul of Capellini High-Performance HSK100 spindle
- Investment approximately €36,000 (net)
- Complete dimensional inspection of all spindle components
- Replacement of precision bearings (FAG / SKF / GMN / NSK)
- New HSK100 clamping system
- Replacement of Balluff sensors
- Laser welding and grinding of spindle shaft
- Replacement of all wear components
- Precision balancing according to ISO 1940
- Complete spindle assembly balancing
- Bearing spacer adjustment
- Final acceptance with inspection report
|
| Documentation |
- Operator Manuals
- Installation Documentation
- Electrical Schematics
- Machine Component Documentation
- Siemens Control Documentation
- Chip Conveyor Documentation
- Original Commissioning Documents
|
| Machine Condition |
- Fully Functional
- Professionally Maintained
- Technically Refurbished
- Very Good Mechanical Condition
- Recently Used Only Occasionally
- Inspection Under Power Possible
- Test Run Available by Appointment
- Ready for Immediate Delivery
|
