Knudson KFD 2025G1 Stud and Track Roll Former – Year 2024
| General Information | ||
|---|---|---|
| Manufacturer | Knudson | |
| Model | KFD 2025G1 | |
| Machine Type | Stud and Track Roll Former | |
| Year | 2024 | |
| Controller | Beck Automation SII Multi-Press Controller | |
| Warranty | 1 Year Manufacturer Warranty | |
| Specification | Metric | Imperial |
|---|---|---|
| Stud / Track Web Sizes | 41 / 64 / 92 / 102 / 152 mm | 1.63″ / 2.50″ / 3.63″ / 4.00″ / 6.00″ |
| Stud Flange Size | 31.8 mm | 1.25″ |
| Track Flange Size | 19.1 mm to 38.1 mm | 0.75″ to 1.50″ |
| Maximum Profile Depth | 38.1 mm | 1.50″ |
| Material Thickness Range | 0.46 – 0.89 mm | 0.018″ – 0.035″ |
| Material Gauge Range | 25 – 20 Gauge | 25 – 20 Gauge |
| Material Strength | Up to 448 MPa Yield Strength | Grade 50 – Up to 65 ksi Yield Strength |
| Minimum Strip Width | 50.8 mm | 2.00″ |
| Maximum Strip Width | 431.8 mm | 17.00″ |
| Pass Line Height | 1,041 mm | 41.00″ |
| Decoiler Capacity | 2,040 kg | 4,500 lbs |
Roll Forming Configuration
| Feature | Description |
|---|---|
| Adjustment Stations | 1 Station |
| Pull-Out Station | 1 Station |
| Roll Forming Stations | 10 Stations |
| Cut-Off System | Exit-End Cut-Off |
| Cutting Method | Stop-to-Cut System |
| Profile Capability | Multi-Profile Roll Former |
| Knurled Flange Faces | Stud and Track Profiles |
| Maximum Track Flange Width | 38 mm (1.50″) |
| Single Profile Flange Width | 31.8 mm (1.25″) |
Material Compatibility
| Item | Specification |
|---|---|
| Material Finish | Galvanized (up to G120), Painted, or Bare Steel |
| Multi-Gauge Capability | 25 to 20 Gauge (Non-Structural) |
| Supported Web Sizes | 1.63″, 2.50″, 3.63″, 4.00″, and 6.00″ |
Included Equipment
| Equipment | Description |
|---|---|
| Power Supply Options | 460V / 60Hz / 3-Phase or 380V / 50Hz / 3-Phase |
| Power Train | Standard Power Train |
| Controller Package | Beck Automation SII Control Kit |
| Adjustment System | Manual Roll Former Adjustment |
| Shear Tooling | Standard Multi-Profile Shear Blade and Die Kits |
| Service Hole Punch Kit #1 | 0.75″ × 1.50″ (19 × 38 mm) |
| Service Hole Punch Kit #2 | 1.50″ × 3.00″ (38 × 76 mm) |
| Safety System | Safety Return |
| Tooling Package | Standard Tool Kit Included |
