KAO MING KMC-3000SD1500 CNC Double Column Vertical Machining Center – Year 2006
| Manufacturer | KAO MING |
| Model | KMC-3000SD1500 |
| Machine Type | CNC Double Column Vertical Machining Center |
| Year | December 2006 |
| CNC Control | FANUC 18i-MB |
| Maximum Table Load | 9,000 kg |
| X-Axis Travel | 3,230 mm |
| Y-Axis Travel | 1,400 mm |
| Z-Axis Travel | 700 mm |
| Distance Between Columns | 1,500 mm |
| Table to Spindle Distance | 200 – 900 mm |
| Spindle Taper | BT50 |
| Spindle Drive | Gear Driven |
| Maximum Spindle Speed | 6,000 RPM |
| Ball Screw Cooling | Yes |
| Mold & Die Package | Active |
Machine Condition & Refurbishment
| Overall Condition | The machine has been completely refurbished and is reported to operate with high precision. |
| Previous Application | Used in-house for mold and die manufacturing. |
| Table / Guideway Work | The table Turcite has been newly replaced. |
| Ball Screws | X, Y and Z-axis ball screws have recently been serviced. |
| Axis Bearings | Axis bearings have been replaced with NTN bearings. |
| Air Conditioning Unit | Serviced. |
| Machine Enclosure | Sandblasted and refinished with static zinc primer and electrostatic powder coating. |
| Lubrication System | Lubrication line has been replaced. |
| Guideway Covers | Wiper seals on the guideway covers have been replaced. |
| ATC – Automatic Tool Changer | The ATC operates manually and has no known mechanical deficiency; however, it currently does not operate through the CNC program. The seller believes this may be parameter-related and it has not been investigated because automatic operation was not required for their application. |
| Inspection | The machine is under power and can be inspected in operation at its current location. |
Included Equipment & Tooling
| Face Mill | 125 mm face mill included |
| Tool Holders | Approximately 14-15 assorted ER32 and ER40 tool holders included |
Additional Information
The machine has been used directly by the owner for in-house mold manufacturing and has not been operated by general production personnel. Following extensive refurbishment and maintenance work, the machine is reported to maintain high machining accuracy. The machine is currently connected to power and is available for inspection and operational testing.
