Hartford HEP-3150 – Year 2010
CNC Double Column Vertical Machining Center 3.25 Meters
| Axis X | 3250 mm |
| Axis Y | 1500 mm |
| Axis Z | 780 mm |
| Rotary table (4th axis) | no |
| Type of CNC | Fanuc |
| Table length | 3000 mm |
| Table width | 1400 mm |
| Max. part weight | 7000 kg |
| Spindle taper | BT50 |
| Hartford HEP-3150 | CNC Double Column Vertical Machining Center |
| Worked hours | 43779 hours |
Hartford HEP-3150 Double Column Vertical Machining Center
Machine is in good working condition
Working hour : (July 2023)
Fanuc control unit
X : 3250 mm
Y: 1500 mm
Z : 780 mm
Manufacturer Catalogue Information about
Hartford HEP-3150 CNC Double Column Vertical Machining Center :
WORKING AREA
| Working Surface Size (Length x Width) | mm | 3000X1400 |
| Max. Workpiece Weight | kg | 7000 |
| Height Between Table and Spindle | mm | 160+780=940 |
| Distance From Spindle Center to Column | mm | 430 |
AXES
| Guideway Type | LINEER | |
| X-axis Travel | mm | 3250 |
| Y-axis Travel | mm | 1500 |
| Z-axis Travel | mm | 780 |
| Positioning Accuracy (JIS B6330) | mm | 0.010 |
| Repeatability Accuracy (JIS B6330) | mm | 0.003 |
| Positioning Accuracy (VDI 3441, 5 times) | mm | 0.015 |
| Repeatability Accurac (VDI 3441, 5 times) | mm | 0.014 |
SPINDLE
| Spindle Speed (Gear) | devir / dk | 6000(8000) |
| Spindle Speed (Direct Drive) | devir / dk | 10000(12000) |
FEED RATE
| Cutting Feed Rate (X, Y, Z) | mm / dk | 1~8000 |
| Rapid traverse (X, Y, Z) | mm / dk | 15000/15000/15000 |
AUTOMATIC TOOL CHANGER
| Tool Number | adet | 20 |
| Max. Tool Weight | kg | 15 |
| Max. Tool Size (Diameter and Length) | mm | 125 x 300 |
| Pull stud bolt | P50T–1 |
CONTROL UNIT
| MITSUBISHI | M830S,M830W | |
| FANUC | 0İMF,31İMB | |
| HEIDENHAIN | İTNC530 |
OTHER
| Required air pressure | kg / cm2 | 6,5 |
| Electric Power Consumption | KVA | 50 |
| Machine Weight | kg | 22950 |
| Machine Floor Space | mm | 10200 x 5640 |
STANDARD ACCESSORY
Semi-enclosed Splash Guard
Spindle air curtain
Coolant Tank
Pre-load on 3 axes
Z axis counter balance
Table side air blast M50 control
Spray around spindle
Tool package
Hartford manual x 1
RS-232
Operator panel,rotary type
Automatic power off
Lubriction syste
Fluorescent lamp x 1
Foundation bolt,General
OPTIONAL ACCESSORIES
Full-enclosed splash guard & top cover
NC rotary table
Front mounted screw type chip conveyor
Link type chip conveyor
Coolant flushing device
Coolant through spindle
Wash down hose
Air gun
Spindle oil cooler
Automatic door system operating door
Auto tool length measurement
Auto workpiece measurement
Coolant-loop linear scale positioning system
Ladder of maintenance
Fluorecent Lamp x 2
Three-Steps treadle
L1500 x W810 x H852mm
