| Specification | Metric | Imperial |
|---|---|---|
| Manufacturer | Haas | Haas |
| Model | GM-2-5AX | GM-2-5AX |
| Year | 2024 | 2024 |
| Machine Type | CNC 5-Axis Gantry Vertical Machining Center | CNC 5-Axis Gantry Vertical Machining Center |
| X-Axis Travel | 3,683 mm | 145″ |
| Y-Axis Travel | 2,223 mm | 87.5″ |
| Z-Axis Travel | 998 mm | 39.30″ |
| Spindle Nose to Table | 127 – 940 mm | 5″ – 37″ |
| Spindle Motor | 11.9 kW | 16 HP |
| Maximum Spindle Speed | 20,000 RPM | 20,000 RPM |
| Spindle Taper | HSK-A63 | HSK-A63 |
| B-Axis Tilt Range | ±120° | ±120° |
| C-Axis Rotation Range | ±245° | ±245° |
| Table Size (L × W) | 3,658 × 1,829 mm | 144″ × 72″ |
| Maximum Table Load | 2,722 kg | 6,000 lbs |
| Maximum Cutting Feedrate | 12,000 mm/min | 472 IPM |
| Rapid Traverse (X) | 12,000 mm/min | 472 IPM |
| Rapid Traverse (Y) | 48,000 mm/min | 1,889 IPM |
| Rapid Traverse (Z) | 30,000 mm/min | 1,181 IPM |
| Tool Changer | 30+1 Side-Mount ATC (SMTC) | 30+1 Side-Mount ATC (SMTC) |
| Coolant Tank Capacity | 360 Liters | 95 Gallons |
| Electrical Requirement | 220V / 3 Phase / 40 A | 220V / 3PH / 40 FLA |
| Machine Weight | 9,979 kg | 22,000 lbs |
| Machine Dimensions (L × W × H) | 5,740 × 3,632 × 3,480 mm | 226″ × 143″ × 137″ |
| Equipped With | Haas NGC CNC Control, 64 GB Expanded Memory, High-Speed Machining, Dynamic Work Offset & Tool Center Point Control (DWO/TCPC), Early Power Failure Detection Module, Ethernet Interface, Haas Connect, HaasDrop, Second Home Position, Media Display, Large Touchscreen Remote Jog Handle, Rigid Tapping, Power Surge Protection, Touchscreen Control, Wi-Fi Connectivity, Wireless Intuitive Probing System (WIPS), 20,000 RPM HSK-A63 Spindle, 30+1 Side-Mount Tool Changer, Coolant System, Chip Auger, Control Cabinet Cooler, Steel Table (Inch). |
|
| Additional Information | Machine can be demonstrated under power upon request. | |
CNCBUL Industrial Machinery Solutions
Global Industrial Machine Solutions & Investment Advisory
Latest Guest Posts
Buying Guide
REQUEST MACHINE INSPECTION : used Amada LC3015 F1NT CNC Laser Machine 4kW – Year 2006 made in Japan
Home › Blog › Buying Guide › REQUEST MACHINE INSPECTION : used Amada LC3015 F1NT CNC Laser Machine 4kW –…
Read Guest Post →
Buying Guide
REQUEST MACHINE INSPECTION : used Matsuura VX-1000 CNC Vertical Machining Center Spindle 20,000 rpm – Year 2013 made in Japan
Home › Blog › Buying Guide › REQUEST MACHINE INSPECTION : used Matsuura VX-1000 CNC Vertical Machining Center Spindle 20,000…
Read Guest Post →
Buying Guide
REQUEST MACHINE INSPECTION : used Quintus Technologies AVURE (ASEA) QRL-63 Fluid Cell Forming Deep Drawing Cavity Forming Hydroform Press 6610 Ton
Home › Blog › Buying Guide › REQUEST MACHINE INSPECTION : used Quintus Technologies AVURE (ASEA) QRL-63 Fluid Cell Forming…
Read Guest Post →