← Back to Machine List

Ganesh Machinery GT-2680 – Year 2022

Ganesh Machinery GT-2680 – Year 2022
Condition : New

26” x 80″ Geared Head Engine Lathe
Beautiful, new condition. Made in Taiwan. Meehanite Castings, fine grain and high-density cast iron using the superior Meehanite process yields superior vibration dampening and improved surface finish and tool life, as well as greater wear resistance on the ground way surfaces.

Includes 1 year parts warranty!
Available to view under power on show room floor by appointment through Machinery Dealer Company.

Optional accessories available.

FEATURES

  • 33-1/4” Swing in 6.5” Wide Gap
  • 15-HP Spindle Motor
  • Spindle Speeds from 15 – 1200 RPM
  • 12-Spindle Speed Gear-Ranges for High-Torque
  • D1-11 Camlock Spindle
  • 4-1/8” Spindle Bore
  • Longitudinal Rapid Traverse Positioning
  • Efficient 2-Speed Quill Advance

INCLUDES                                           

  • 12” 3-jaw Chuck
  • 16” 4-jaw Chuck, 6.3″ Bore
  • Steady Rest
  • Follow Rest
  • Full Length Splash Guard
  • Foot brake
  • 4-Way Tool Post w/wrench
  • Chuck Guard
  • Machine Leveling Pads
  • Halogen Work Light
  • Optional accessories available.
    • Contact us to get the best price quote.

SPECIFICATIONS                                     

CAPACITY
  
Swing Over Bed
 26″
Center Height
 13″
Swing Over Cross Slide
 18-1/16″
Swing Over Gap
 33-1/4″
Length of Gap in Front of Face Plate, D1-6
 6-1/2″
Distance Between Centers
 80″
SPINDLE
  
Spindle Motor
 15-HP
Spindle Speeds, 12
 Low 15 to 375
High 85 to 1200
Spindle Bore
 4-1/8″
Spindle Nose
 D1-11
Spindle Taper
 MT-8
CARRIAGE
    
Cross Slide Travel
 14.96″
 380mm
Cross Slide Width
 7-3/32″
 180mm
Cross Slide Lead Screw Pitch
 4 TPI
  
Cross Slide Resolution Per Division
 0.200″/rev
  
Carriage Lead Screw Diameter
 1-1/2″
 38mm
COMPOUND
    
Top Slide Travel
 10″
 255mm
Top Slide Width
 4-11/32″
 110mm
TAILSTOCK
    
Quill Diameter
 2-15/16″
 75mm
Quill Stroke
 6-5/16″
 160mm
Quill Taper
 MT-5
  
THREAD CUTTING
    
Thread Cutting Range, 60 inch pitches
 2 – 112 tpi
  
Thread Cutting Range, 60 metric pitches
 0.2 – 14mm
  
FEEDS
    
Longitudinal, 50 feeds
 0.0014” –   0.0387”/rev.
  
Cross, 50 feeds
 0.0007” –   0.01935”/rev.
  
WEIGHT & DIMENSIONS
    
Machine Dimensions
 140” x 51”
  
Machine Height
 54″
  
Machine Weight
 6,283 lbs.
  
Power Requirements
 220 Volt, 3-Phase
 40 amps

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

REQUEST MACHINE INSPECTION : used Amada LC3015 F1NT CNC Laser Machine 4kW – Year 2006 made in Japan Buying Guide
14/09/2026 • 1 min read

REQUEST MACHINE INSPECTION : used Amada LC3015 F1NT CNC Laser Machine 4kW – Year 2006 made in Japan

Home › Blog › Buying Guide › REQUEST MACHINE INSPECTION : used Amada LC3015 F1NT CNC Laser Machine 4kW –…

Read Guest Post →
REQUEST MACHINE INSPECTION : used Matsuura VX-1000 CNC Vertical Machining Center Spindle 20,000 rpm – Year 2013 made in Japan Buying Guide
14/09/2026 • 2 min read

REQUEST MACHINE INSPECTION : used Matsuura VX-1000 CNC Vertical Machining Center Spindle 20,000 rpm – Year 2013 made in Japan

Home › Blog › Buying Guide › REQUEST MACHINE INSPECTION : used Matsuura VX-1000 CNC Vertical Machining Center Spindle 20,000…

Read Guest Post →
REQUEST MACHINE INSPECTION : used Quintus Technologies AVURE (ASEA) QRL-63 Fluid Cell Forming Deep Drawing Cavity Forming Hydroform Press 6610 Ton Buying Guide
14/09/2026 • 8 min read

REQUEST MACHINE INSPECTION : used Quintus Technologies AVURE (ASEA) QRL-63 Fluid Cell Forming Deep Drawing Cavity Forming Hydroform Press 6610 Ton

Home › Blog › Buying Guide › REQUEST MACHINE INSPECTION : used Quintus Technologies AVURE (ASEA) QRL-63 Fluid Cell Forming…

Read Guest Post →