Ganesh Gen Turn SL-42Y2 HYBRID 42 MM 8-Axis CNC Swiss Machine – Year 2021
Make: Ganesh Gen Turn
Model: SL 42 Y2
SN: 0266
Year: 2021
Control: Mitisubishi
MAIN SPINDLE
Spindle Speed Max: 6,000 rpm
Spindle Motor:
10 HP (15 min)
7.5 HP (Constant)
Collet Style for Main & Subspindle: Traub-42 / 173E
Collet Closer Style: Lever Action
Bar Diameter, w/o guide bushing: 1-5/8″ (42mm)
Maximum Turning Length: 4.13″ (105mm)
Spindle Bore Diameter: 1.732″ (44mm)
SUB-SPINDLE
Speed: 6,000 rpm
Spindle Bearing:
Quad Duplex Pair
Main Spindle Servo Motor:
10 HP (15 min)
7.5 HP (Constant)
Collet Style:
Traub-42 / 173E
Max. Barstock Diameter: 1-5/8″ (42mm)
Spindle Bore Diameter: 1.732″ (44mm)
Maximum Workpiece Length for Front Ejection: 110mm
AXIS
Main Spindle Stroke: 12.20″ (310mm)
Rapid Traverse Rate, X/Y/Z-1, X/Y/Z-2: 944 ipm (24 m/min)
X1, Z1 Axis Motor Power: 2 HP (1.4 kw)
X2, Y1, Y2, Z2 Axis Motor Power: 1 HP (.75 kw)
X1, Y2 Linear Ways: Ball Bearing
X2, Y1, Z1, Z2 Linear Ways: Roller Bearing
Machine Dimensions: 121″x67″x83″
Power Requirements: 220 Volt, 60 Hz, 3-Phase, 80 Amps, 30 kVA
Air Requirement: 85 psi @ 6 cfm
Features:
Bar Capacity to Ø1-5/8”,
3-Bank Axial Live Tool,
Double “Y” Axis and Double “C” Axis,
Simultaneous Main & Sub-Spindle Machining,
30-Tools with 8-Driven Tools, Standard
Parts Conveyor,
Chip Conveyor,
2021 Mistbuster 850 Filtration and
2021 Edge 193” Bar Feeder.
Why do Customer prefer Ganesh Gen Turn SL-42Y2 HYBRID 42 mm 8-Axis CNC Swiss Machine?
MAIN SPINDLE
|
Maximum RPM / Spindle Bearing |
6,000 RPM / 5 Bearing Spindle, 3 Front, 2 Rear Ball Bearings |
|
Main Spindle Servo Moto (5.5 / 7.5 kw) |
10 HP 15 min Duty Rated (7.5 HP Constant Duty Rated) |
|
Collet Style for Main & Subspindle |
Traub-42 / 173E |
|
Collet Closer Style |
Lever Action Collet Closer – Driven by Hydraulic Piston |
|
Guide Bushing Type |
Optional Rotary Guide – Bushing uses Hardinge STM38 Bushings |
|
Bar Diameter |
Ø1/4” – 1-5/8” (Ø5 – 42 mm) without Guide Bushing |
|
Maximum Turning Length (Rotary Bushing) |
12.20” Single Stroke (310 mm) (Rotary Guide Bushing Optional) |
|
Maximum Turning Length (without Bushing) |
4.13” (105 mm) |
|
Spindle Bore |
Ø1.732” (Ø44 mm) |
MAIN SPINDLE TOOLING
|
OD Turning Tool Holders – S1 |
6 – 16 mm (5/8”) Square Shank Tool Holders |
|
|
ID Internal Tool Holders – S1 |
5 – 25 mm Shank Round Tool Sleeve Bores |
|
|
ID Deep Hole Drill Positions – S1 |
2 – 25 mm Shank Round Tool Sleeve Bores |
|
|
Cross Slide Live Tools – S1 |
6 – ER-20 Collet Chuck Spindles, 4,000 RPM, 2 HP (1.6 kw) |
|
|
Axial Front Slide Live Tool Option – S1 |
3 – ER-20 Front Axial Live Tools – Optional in lieu of 1 Cross Tool |
|
|
Maximum Drilling / Tapping Capacity |
13 mm Drilling / M10 Tapping |
|
|
Cross Drilling / Tapping Capacity Option |
10 mm Drilling Capacity / M6 Tapping |
SUB-SPINDLE
|
Sub-Spindle RPM / Spindle Bearing |
6,000 RPM / 4-Bearing – Quad Duplex Pair Configuration |
|
Main Spindle Servo Moto (2.2 / 3.7 kw) |
10 HP 15 min Duty Rated (7.5 HP Constant Duty Rated) |
|
Collet Style for Main & Subspindle |
Traub-42 / 173E |
|
Maximum Barstock Diameter |
1-5/8” (42 mm) (42 mm Parts can Through the Subspindle) |
|
Spindle Bore |
Ø1.732” (Ø44 mm) (uses Hydraulic Piston Lever Action Collet Closer) |
|
Finished Parts Ejector & Air Blast |
Included |
|
Maximum Workpiece Length for Front Ejection |
110 mm Maximum Part Length for Front Ejection from Subspindle |
SUB-SPINDLE TOOLING
|
OD Turning Tool Holders – S2 |
3 – 16 mm Square Shank Turning Tool Holders |
|
ID Internal Tool Holders – S2 |
5 – 25 mm Shank Round Tool Sleeve Bores |
|
ID Internal Tool Holders – S2 (8 possible) |
3 – ER-16 Fixed Tools – Ø3/8” Max. |
|
Subspindle Axial Live Tools – S2 (8 possible) |
3 – ER-16 Axial Live Tools, 4,000 RPM, 1.0 HP (0.75 kw) |
|
(8-subspindle tool block can mix live & fixed tools, or 2 radial live tools can be substituted for 2 axial tools on subspindle tool block) |
|
|
Maximum Drilling / Tapping Capacity |
13mm Drilling Capacity / M10 Taping on Sub-Spindle |
|
Maximum Cross Drilling / Tapping Capacity |
8mm Drilling Capacity / M6 Tapping |
AXIS
|
Main Spindle Stroke |
12.20” (310 mm) |
|
X1, Y1, Z1, X2, Y2, Z2 Rapid Traverse Rate |
944 IPM (24 m / min) |
|
X1, Z1 Axis Motor Power |
2 HP (1.4 kw) |
|
X2, Y1, Y2, Z2 Axis Motor Power |
1 HP (.75 kw) |
|
X1, Y2 Linear Ways |
Ball-Bearing Linear Ways (Point Contact) |
|
Z2, Y1, Z1, Z2 Linear Ways |
Roller-Bearing Linear Ways (Line Contact – Twice as Rigid) |
|
Minimum Input Unit |
0.0001” (0.001 mm = 40 millionths/inch) |
SPECIFICATIONS
|
Machine Dimensions (L x W x H) |
121” x 67” x 83” (2,925 x 1,690 x 2,100) + 29” for Conveyor |
|
Machine Weight |
11,024 lbs. (5000 kgs) |
|
Coolant Pump Power |
1-3/4 HP (1.3 kw) with Flow Confirmation Monitor |
|
Coolant Tank Capacity |
65 gallon Coolant Tank (250 L) (Cutting Oil Only, No Coolant) |
|
Lubrication Distribution (2-liter Capacity) |
Way Lube Distributed at 3 – 6 cc / 15 min Cycle |
|
Machine Power Requirements |
220 vac ±5%, 80 amps, 30 kVA, 3 phase, 60 Hz |
|
Air Requirements |
85 PSI at 6 CFM for Parts Catcher, Parts Ejector, & Air Blast |
