| Specification |
Metric |
Imperial |
| Manufacturer |
Fujicar |
Fujicar |
| Machine Type |
Double-Initial Pinch Plate Bending Rolls |
Double-Initial Pinch Plate Bending Rolls |
| Year of Manufacture |
1976 |
1976 |
| Country of Origin |
Japan |
Japan |
| Current Location |
Contact Us |
Contact Us |
| Plate Bending Capacity |
41 mm × 3,962 mm |
1-5/8″ × 13 ft |
| Maximum Hot Bending Capacity |
203 mm (Hot Rolling) |
8″ |
| Machine Design |
3-Roll Double Initial Pinch |
3-Roll Double Initial Pinch |
| Pre-Bending Capability |
Can pre-bend both ends without press brake |
Can pre-bend both ends without press brake |
| Cone Rolling |
Yes |
Yes |
| Main Bending Motor |
55 kW |
73.7 HP |
| Upper Roll Diameter (Large) |
560 mm |
22-3/64″ |
| Additional Upper Roll Diameter (Small) |
406 mm |
16″ |
| Minimum Bending Diameter (with Small Roll) |
711 mm |
2 ft 4″ |
| Lower Roll Diameter |
508 mm |
20″ |
| Drop End |
Hydraulic |
Hydraulic |
| Drive System |
Fully Mechanical |
Fully Mechanical |
| Control System |
Manual |
Manual |
| Electrical Supply |
480V / 3-Phase |
480V / 3-Phase |
| Machine Condition |
Good, Carefully Disassembled and Ready for Loading |
Good, Carefully Disassembled and Ready for Loading |
| Setup & Operation Assistance |
Available |
Available |
| Large Top Roll Weight |
11,793 kg |
26,000 lbs |
| Small Top Roll Weight |
4,990 kg |
11,000 lbs |
| Bottom Rolls Overall Length |
5,359 mm |
17 ft 7″ |
| Control Panel Dimensions (D × W × H) |
610 × 2,057 × 1,524 mm |
24″ × 6 ft 9″ × 5 ft |
| Gearbox Dimensions (W × L × H) |
1,829 × 2,438 × 2,743 mm |
72″ × 8 ft × 9 ft |
| Gearbox Weight |
9,072 kg |
20,000 lbs |
| Left & Right Drive Shaft Length |
2,134 mm |
7 ft |
| Left & Right Drive Shaft Diameter |
432 mm |
17″ |
