EMCO EMCOTURN ET 500X1500 CNC Lathe – Year 2002

Used CNC Lathe EMCOTURN ET-500×1500
WORKING AREA
Swing diameter over bed …………………………………………………. 580 mm
Swing diameter over cross slide …………………………………… 400 mm
Largest turning diameter ………………………………………… 450 mm
Longitudinal slide travel (Z) ……………………………….. 1,060 mm / 1,560 mm
Face-to-face slide travel (X) …………………………………. 310 mm
Width between centers …………………………………………………… 1,000 mm / 1,500 mm
WORKPIECE SIZE
Max. workpiece length ………………………………………….. 1,000 mm / 1,500 mm
Max. workpiece size for bar stock ……………………………. 102 mm
Max. workpiece weight between centers ……………………………. 1,200 kg
Max. workpiece weight on the fly ……………………………. 400 kg
Center of gravity distance to the chuck face ………………………….. 175 mm
HEADSTOCK
Spindle mount DIN 55026 ………………………………….. A2-8 (ASA 8″)
Spindle bearing in the front bearing ………………………….. Ø 150 mm
Spindle bore ………………………………………………………… Ø 103 mm
Passage in the drawtube / for bars ………………………… Ø 90 mm
MAIN DRIVE
Digital AC motor …………………………………………………….. SIEMENS
ZF gearbox on the main motor …………………………………….. (100/40% duty cycle) 28 / 43 kW
Main spindle speed ………………………………………. 2 speeds
Speed level 1: ………………………………………………… 40 – 850 rpm
Speed level 2: ………………………………………………… 40 – 3,200 rpm
Max. torque …………………………………………………….. 909 / 1,396 Nm
Option: ……………………………………………………….. 952 / 1,125 Nm FEED DRIVES digital AC
Spindle stroke diameter X / Z ……………………………………… 40 mm
Longitudinal feed force (Z-axis) ……………………………………… SIEMENS 13,570 N / FANUC 10,180 N
Transverse feed force (X-axis) ………………………………….. SIEMENS 9,050 N / FANUC 7,000 N
Rapid traverse X / Z …………………………………………………………… 20 / 20 m/min
Positioning accuracy Ps (VDI 3441) X, Z ……………… 0.006 / 0.007 mm
TOOL SYSTEM
Number of tool holders …………………………………………. 12
Tool holder according to DIN 69880 AXIAL
Tool holder ………………………………………………… VDI-40
Power of the driven tools
Speed ………………………………………………. max. 8 kW at 3000 rpm
Torque ………………………………….. max. 3000 rpm / max. 27 Nm
TAILSTOCK
Positioning: Automatic carriage drag
Clamping: Automatic
Quill diameter: 100 mm
Quill stroke: 120 mm
Internal taper: MT 4
Quill clamping force, continuously adjustable up to: 14,500 N
Y-AXIS
Y-slide stroke: +50 / -50 mm
COOLANT SYSTEM
Reservoir capacity (1,000 / 1,500 rpm): 200 / 230 l
Coolant supply: via tool turret
at 50 Hz: 7.0 bar with a flow rate of: 5 l/min
0.5 bar with a flow rate of: 57 l/min
Weight approx. 9 t

Attention! This machine will be available from mid-January 2026, because that’s when the new machine will be arriving.
Machine can be upgraded after By arrangement, the machine can be viewed under power .
We can load it.
The buyer is responsible for transport.
Technical data, accessories, and descriptions of the machine are non-binding.