EGURO SAGATURN-10 – Year 2014
FANUC 31i Model A LR Mate 200iCSL with robot
Manufacturer Catalogue Information about EGURO SAGATURN-10 :
| Item | Description | ||
| Capacity | mm | Max.φ80×250 | |
| First spindle | Spindle nose type | φ100 Flat type | |
| Change of speed | Step-less S4 digits direct command | ||
| Speed | min-1 | Max.5,000 | |
| First spindle Spindle nose |
Collet series | mm | EDA-10 |
| >Size of collet | Max.φ25.5 | ||
| Second spindle | Spindle nose type | φ100 Flat type | |
| Change of speed | Step-less S4 digits direct command | ||
| Speed | min-1 | Max.5,000 | |
| Second spindle Spindle nose |
Collet series | mm | EDA-10 |
| Size of collet | Max.φ25.5 | ||
| Synchronous speed | min-1 | Max.5,000 | |
| Synchronization | Phase,Speed | ||
| Slide | Type | Vertical linear turret | |
| Travel | mm | X axis:100 | |
| Y axis:150 | |||
| Z axis:300 | |||
| A axis:300 | |||
| Rapid traverse | m/min | X axis:10 | |
| Y axis:12 | |||
| Z axis:15 | |||
| A axis:10 | |||
| Number of tools | Max.7 | ||
| Motor | First spindle | kw | 2.2/3.7 |
| Second spindle | 2.2/3.7 | ||
| NC contril unit | FANUC 0i-TF | ||
