• 39.4″ (1,000 mm) 4-Jaw Manual Chuck
• 12.6″ (320 mm) Bar Capacity
• Tailstock
• 12-Station Bolt-On Turret
• Chip Conveyor
• Coolant System with Tank and Pump
• RS-232 Communication Interface
• Card Interface
• Wired for 200/220 Volt Electrical Supply
• All Available Manuals
• All Available Static Tooling

The machine is controlled by the dependable Fanuc Series 21i-TB CNC Control, providing accurate machining performance and proven reliability in production environments. Its heavy-duty spindle features an A1-20 spindle nose with a large 12.6″ (320 mm) spindle bore and 12.6″ (320 mm) bar capacity, allowing it to process exceptionally large diameter materials. The spindle operates from 3 to 750 RPM and is powered by a 60 HP (44.7 kW) 30-minute rated motor with a continuous output of 50 HP (37.3 kW), delivering outstanding cutting power for heavy machining operations.

With a maximum turning diameter of 35.4″ (899 mm), a swing over bed of 40.6″ (1,031 mm), and a generous 126″ (3,200 mm) distance between centers, the Puma 800L offers excellent capacity for long and heavy workpieces. The machine incorporates a rigid 12-position bolt-on turret, heavy-duty tailstock with MT5 taper, and rapid traverse rates of 472 IPM (12 m/min) on the X-axis and 397 IPM (10.1 m/min) on the Z-axis to maximize productivity while maintaining machining accuracy.

Standard equipment includes a 39.4-inch manual chuck, tailstock, chip conveyor, coolant system with tank and pump, RS-232 communication interface, card interface, and complete available manuals and static tooling. Wired for 200/220V electrical service, this machine is ready for installation in a wide range of industrial facilities.

Measuring approximately 290″ × 110″ × 102″ (7,366 × 2,794 × 2,591 mm), or 355″ (9,017 mm) long with the chip conveyor installed, and weighing approximately 48,500 lbs (22,000 kg), the Doosan Puma 800L delivers the mass, stability, and durability required for continuous heavy-duty CNC turning operations.