DMG CTX gamma 1250 TC CNC MultiTasking Turn-Mill Center – Year 2009
CTX gamma 1250 TC
2009/2012 year of production and sale (must be checked). This machine is “lit” on many sites. Set the owner. (We know 🙂
Turning and milling center – DMG GILDEMEISTER – CTX gamma 1250 TC
Year of manufacture: 2009
Purchase of additional / extended equipment:
– 2 SMW AUTOBLOK cartridges with 3 cams / power cartridges
– a Marposs probe with software, – an extraction system, – a large coolant tank
for the belt filter system, capacity: 1000 l.
The machine can be checked by prior appointment at the factory under voltage.
Machine on (10/01/2010): 28,545
Spindle times (01.10.2010): 5,046
Condition: very good, ready for immediate use
The heart of the machine is a built-in movable column with rotation
milling spindle and interpolating axis V. High-efficiency turning works
Complex 5-axis simultaneous processing is also possible.
Main data of the machine:
* Part of the hollow clamping device (hydraulic)
* Axis C
* Cross-sliding above with rotary/milling spindle as motor spindle
with hydraulic clamp when turning, tool holder: Capto C6
* Y-axis: +/- 200 mm
* B-axis: +/- 120°
* Disc tool log
* absolute, direct measuring systems along axes X, Y, Z1
* USB interface, Ethernet interface
TECHNICAL CHARACTERISTICS:
* Control: Heidenhain CNC Pilot 4290, 3-D path control
TURN PLUS
Working area:
* Diameter of swing above the bed: 630 mm
* Turning diameter: 630 mm
* Spindle distance: 1,510 mm
* Maximum rod diameter: 65 mm
Main disk I:
* Drive power (100% ED): 24 kW
* Drive power (40% ED): 34 kW
* Range of speeds from – to: – 5000 rpm
* Torque (100% ED): 280 Nm
* Maximum torque (40% ED): 380 Nm
* C-axis speed: – 5000 rpm
* C-axis torque (holding torque): 280 Nm
Turning / milling spindle:
* Tool holder: Capto C6
* Spindle speed: – 12000 rpm
* Drive power (100% ED): 13.2 kW
* Drive power (40% ED): 22 kW
* Torque (100% ED): 60 Nm
* Torque (40% ED): 100 Nm
* Partial step of the spindle axis: 0 degrees
* Holding torque locked: 1000 Nm
Instrument magazine:
* Number of tools: 36
* Maximum length of the tool: 400 mm
* The maximum diameter of the tool: 80 mm
* Maximum weight of the tool: 10 kg
* The dimensions of the machine are approx. (Width / depth / height):
6860 x 4220 x 2530 mm
* Total weight of the machine approx.: 18.5 tons
EQUIPMENT:
* Cartridge flushing device on counter spindle, outside
* Pressure drop for the main spindle
* The main spindle is an integrated ISM 102 spindle motor
– Drive power: 35/45 kW (100/40% ED)
– Torque: 600/700 Nm (100/40% ED)
– Speed range: 20 – 4000 rpm
– Partial hollow clamping device (hydraulic)
– Internal diameter of the pipe: 104 x 848 mm in depth
– axis C and spindle brake (hydraulic)
* Tailstock function for counter spindle
– Mechatronic control of the supporting force in the program of choice
– Support force: 250 – 600 daN, CTX beta / beta TC
– Support force: 250 – 1200 daN, CTX gamma TC
* Counter spindle ISM 102, axis C instead of tailstock
– The spindle counter is a built-in spindle motor
– Drive power: 35/45 kW
– Partial hollow clamping device, hydraulic (exhaust pipe diameter: 104 mm)
– axis C and spindle brake (hydraulic)
– Base guide (Z3), AC servo drive with ball-screw drive and parking brake,
absolute position measurement system in the feed motor
– Cooling system of engine console and spindle engine
* Electrical / mechanical connection for oil mist
* Capto C6 tool holder (Sandvik) instead of HSK-63A
* Coolant sprayer
* A separate speed limitation device for a power cartridge with specified speeds,
which are below the max. machine speed per spindle is required
* Separate speed limitation for counter spindle
* No permanent rest is available
* Documentation is complete.
* Optionally available (not included in the offer):
– Capto tool holders, approx. 37 pieces
– 1 cartridge SCHUNK ROTA THW plus 260-81, 1 cartridge SCHUNK ROTA THW plus 215-62,
With various hard and soft jaws.
There is no guarantee of correctness and completeness of technical details.
and accessories.
technical details / additions / accessories:
turning diameter 630 mm
turning length 1.510 mm
control Heidenhain CNC Pilot 4290
bars pass around the bed 630 mm
bar material maximum 65 mm
c-axis
axis in +/- 200 mm
b axis +/- 120°
rotation speed range max. 5000 rpm
Max. Torque 100% ED: 280 Nm
Max. Torque 40% ED: 380 Nm
maximum rotation speed of the C axis: 5000 rpm
C-axis torque: 280 Nm
Capto C6 cone instrument
spindle speed: – 12000 rpm
power – milling spindle 100% ED: 13.2 kW
power – milling spindle 40% ED: 22 kW
maximum torque on spindle 100% ED: 60 Nm
maximum torque on spindle 40% ED: 100 Nm
tool shop:
The number of tools in the magazine is 36 pieces
the maximum length of the tool is 400 mm
the maximum diameter of the tool is 80 mm
the maximum weight of the tool is 10 kg
dimensions (W / D / H): 6860/4220/2530 mm
the total power consumption is 110 kVA
the weight of the car is about 18.5 tons