| ZPS DEPOCUT CNC Machining Center – Technical Specifications |
| Specification |
Imperial |
Metric |
| Manufacturer |
ZPS, a.s. – Zlin, Czech Republic |
| Axis Travels |
| X-Axis Travel – Cross Beam |
90.55″ |
2,300 mm (hand-corrected value in document) |
| Y-Axis Travel – Cross Slide |
47.2″ |
1,200 mm |
| Z-Axis Travel – Vertical Slide |
31.5″ |
800 mm |
| Feeds & Rapid Traverse |
| Working Feed – X / Y / Z Axes |
787 IPM |
20 m/min |
| Rapid Traverse – X / Y / Z Axes |
1,180 IPM |
30 m/min |
| Acceleration – X / Y / Z Axes |
16.4 ft/sec² |
5 m/sec² |
| Measuring System & Accuracy |
| Measuring System – X / Y / Z Axes |
Linear Scales with Feedback |
| Positioning Accuracy – VDI/DGQ 3441 |
0.0003″ |
0.008 mm |
| Repeatability – VDI/DGQ 3441 |
0.0002″ |
0.006 mm |
| Positioning Accuracy – JIS B 6336 |
±0.00008″ |
±0.002 mm |
| Repeatability – JIS B 6336 |
±0.00006″ |
±0.0015 mm |
| Stationary Work Table |
| Table Working Surface |
90.5″ x 63″ |
2,300 x 1,600 mm |
| Number of T-Slots |
13 |
| T-Slot Width |
0.708″ |
18 H7 mm |
| T-Slot Pitch |
4.9″ |
125 mm |
| Maximum Table Load |
26,455 lbs |
12,000 kg |
| Maximum Workpiece Dimensions at Maximum Tool Length of 300 mm |
82.7″ x 55.1″ x 23.6″ |
2,100 x 1,400 x 600 mm |
| Table Surface Height from Floor |
35.8″ |
910 mm |
| CYTECH Spindle |
| Spindle Manufacturer / Type |
CYTECH |
| Spindle Speed Range |
Document printed as 30 – 18,000 RPM; handwritten correction indicates 15,000 RPM maximum |
| Front Spindle Bearing Diameter |
3.15″ |
80 mm |
| Tool Taper |
DIN 2079-40-AT4-CC (SK40) |
| Spindle Positioning |
Electrical |
| Spindle Motor – Continuous Power |
28.5 HP |
21 kW |
| Spindle Motor – Overload Power (S6-30 min) |
38 HP |
28 kW |
| Rated Spindle Speed |
1,000 RPM |
| Maximum Torque |
142 ft-lbs |
200 Nm |
| Maximum Torque at Overload (S6-30 min) |
189 ft-lbs |
267 Nm |
| Spindle Nose Distance from Table Surface |
3.9″ – 35.4″ |
100 – 900 mm |
| Axis Feed Drives |
| Rated Torque – X-Axis |
2 x 44.9 ft-lbs |
2 x 61 Nm |
| Rated Torque – Y / Z Axes |
44.9 ft-lbs |
61 Nm |
| Rated Speed – X / Y / Z Axes |
1,500 RPM |
| Axial Force – X-Axis |
2 x 8,600 lbs |
2 x 38,300 N |
| Axial Force – Y / Z Axes |
8,600 lbs |
38,300 N |
| Automatic Tool Magazine |
| Tool Holder |
40DIN69871-1-A/AD (ISO/DIS 7388/1) |
| Pull Stud |
40DIN69872-A (ISO/DIS 7388/2 Type A) |
| Tool Magazine Capacity |
12 Tools |
| Tool-to-Tool Change Time |
9 sec |
| Maximum Tool Diameter – Magazine Fully Loaded |
4.3″ |
110 mm |
| Maximum Tool Diameter – Adjacent Pocket Empty |
4.9″ |
125 mm |
| Maximum Tool Length |
11.8″ |
300 mm |
| Maximum Individual Tool Weight |
26.4 lbs |
12 kg |
| Maximum Total Tool Weight in Magazine |
154.3 lbs |
70 kg |
| Lubrication System |
| Lubrication Tank Capacity |
Approx. 0.71 US gal |
2.7 L |
| Lubrication Pump Motor Power |
0.094 HP |
70 W |
| Lubrication Pump Speed |
2,700 RPM |
| Lubrication Pump Flow |
Approx. 0.13 US gal/min |
0.5 L/min |
| Hydraulic System |
| Hydraulic Tank Capacity |
Approx. 2.1 US gal |
8 L |
| Operating Pressure |
Approx. 2,103 – 2,248 PSI |
14.5 – 15.5 MPa |
| Hydraulic Pump Motor Power |
Approx. 1 HP |
0.75 kW |
| Hydraulic Pump Speed |
1,380 RPM |
| Hydraulic Pump Flow |
Approx. 0.48 US gal/min |
1.8 L/min |
| Spindle Cooling Unit |
| Coolant Tank Capacity |
Approx. 6.1 US gal |
23 L |
| Maximum Operating Pressure |
Approx. 377 PSI |
2.6 MPa |
| Power Consumption |
Approx. 2.48 HP |
1.85 kW |
| Cooling Capacity |
Approx. 5.9 HP |
4.4 kW |
| Refrigerant |
R134a / Approx. 3.2 lbs |
R134a / 1.45 kg |
| Maximum Workpiece Capacity |
| Maximum Workpiece Length – X |
82.7″ |
2,100 mm |
| Maximum Workpiece Width – Y |
55.1″ |
1,400 mm |
| Maximum Workpiece Height – Z |
23.6″ |
600 mm |
