DECKEL MAHO DMF 220 Linear CNC Bed Type Milling Machine – Year 2008

CNC Vertical Traveling Column Bed-Type Milling Machine DECKEL MAHO
Vertical Machining Center Type DMF 220 linear
Serial No.: 15115223474 Year of Manufacture 2008
CNC 3D Contour Control Heidenhain iTNC 530
Travel X: 2200 mm, Y: 560 mm, Z: 720 mm
Table Size 2600 x 605 mm
Table Load 2200 kg
Table Height above Floor: 870 mm
Maximum Distance Table-to-Spindle Nose: 752 mm
Spindle Mount SK 40 (DIN 69871 A) – ISO 40 with Pull Stud DIN 69872
Maximum Spindle Speed 12,000 rpm
Spindle drive: 35 kW at 40% duty cycle / 25 kW at 100% duty cycle
Feed rate: 0-20,000 mm/min.
Rapid traverse speed on the X-axis: 100 m/min.
Rapid traverse speed on the Y and Z axes: 50 m/min.
Power supply: 400 volts, 50 Hz, 73 kVA
– 30-station tool changer
– 40 bar internal coolant supply through the spindle (IKZ)
– Air blast with minimum quantity lubrication for tool cooling
– Air blast through the spindle center via M-function
– 2 rotating safety disks
– Operating mode 4, process monitoring during production
– Electronic handwheel on the hand control station
– Adjacent coolant treatment system, paper belt separator with filter recess
– Chip conveyor for sliding under the work area
– Central grease lubrication system
– Operating instructions
– Operating hours – control on = 75,188 h
– Operating hours – program run or spindle on = 31,632 h
– Control with interfaces for data transfer, RS232C + USB
Footprint L x W x H 650 x 400 x 280 cm
Space requirement of the base machine L x W x H 490 x 395 x 275 cm (with control panel)
Space required for chip conveyor L x W x H: 550 x 90 x 160 cm (approx. 500 kg)
Space required for coolant treatment system L x W x H: 180 x 115 x 190 cm (500 kg)
Space required for transport of the base machine L x W x H: 500 x 248 x 275 cm
Additional transport space required for additional components: 550 x 240 x 250 cm
Weight of the base machine: approx. 12.5 tons.
Good condition