| ARION DV1922 CNC Double Column Bridge Machining Center – Year 2023 | ||
|---|---|---|
| Technical Specification | Metric | Imperial |
| Manufacturer | ARION | |
| Model | DV1922 | |
| Year of Manufacture | 2023 | |
| Machine Type | CNC Double Column Bridge Machining Center | |
| CNC Control | Mitsubishi M80 / Type A | |
| Axis Travels & Machining Capacity | ||
| X-Axis Travel | 2,200 mm | 86.61 in |
| Y-Axis Travel | 1,900 mm | 74.80 in |
| Z-Axis Travel | 900 mm | 35.43 in |
| Axis Travels (X / Y / Z) | 2,200 / 1,900 / 900 mm | 86.61 / 74.80 / 35.43 in |
| Distance Between Columns | 1,900 mm | 74.80 in |
| Spindle Nose to Table Distance (Min. / Max.) | 150 / 1,050 mm | 5.91 / 41.34 in |
| Work Table | ||
| Table Size | 2,200 × 1,700 mm | 86.61 × 66.93 in |
| Maximum Table Load | 8,000 kg | 17,637 lb |
| Table Surface Height from Floor | 910 mm | 35.83 in |
| T-Slot Size | 22 × 11 × 150 mm | 0.87 × 0.43 × 5.91 in |
| Spindle | ||
| Spindle Taper | BT50 / BBT50 | |
| Maximum Spindle Speed | 8,000 rpm | |
| Spindle Motor Power | 22 / 26 kW | 29.5 / 34.9 HP |
| Spindle Torque | 664 Nm | 489.7 lb-ft |
| Spindle Oil Cooling System | Included | |
| Through / Around-Spindle Coolant Nozzles | Included | |
| Feed & Axis Drive System | ||
| Axis Motor Power (X / Y / Z) | 7 / 7 / 7 kW | 9.4 / 9.4 / 9.4 HP |
| Rapid Traverse (X / Y / Z) | 12 / 16 / 20 m/min | 472 / 630 / 787 in/min |
| Maximum Cutting Feed Rate | 10,000 mm/min | 393.70 in/min |
| Ball Screw Lead (X / Y / Z) | 12 / 12 / 10 mm | 0.472 / 0.472 / 0.394 in |
| Ball Screw Diameter (X / Y / Z) | Ø50 / Ø55 / Ø50 mm | Ø1.97 / Ø2.17 / Ø1.97 in |
| Precision Roller-Type Linear Guideways | Included | |
| Linear Scales | Equipped | |
| Automatic Ball Screw / Guideway Lubrication System | Included | |
| Telescopic Guideway Covers | Included | |
| Portable Manual Handwheel (MPG) | Included | |
| Accuracy | ||
| Positioning Accuracy (ISO 230-2) | 0.042 mm | 0.00165 in |
| Repeatability Accuracy (ISO 230-2) | 0.020 mm | 0.00079 in |
| Automatic Tool Changer | ||
| ATC Capacity | 32 Tools | |
| Maximum Tool Diameter | 160 mm | 6.30 in |
| Maximum Tool Diameter with Adjacent Pots Empty | 250 mm | 9.84 in |
| Maximum Tool Length | 350 mm | 13.78 in |
| Maximum Tool Weight | 20 kg | 44.09 lb |
| Coolant & Pneumatic System | ||
| Coolant Pressure | 20 bar | 290 psi |
| Coolant Tank Capacity | 900 L | 237.8 US gal |
| Coolant Pump Power | 3/4 HP | |
| Coolant Pump Flow Rate | 200 L/min | 52.83 US gal/min |
| Required Pneumatic Pressure | 6 kg/cm² | 85.3 psi |
| Mitsubishi M80 CNC Control | ||
| Control Unit | Mitsubishi M80 / Type A | |
| Maximum Number of Controllable Axes | 11 | |
| Maximum Simultaneously Controllable Axes | 4 | |
| Maximum Program Memory | 512 KB | |
| Maximum Number of Macro Variables | 700 | |
| Maximum Workpiece Coordinate Offset Sets | 54 Sets | |
| Maximum Number of Tool Offsets | 400 | |
| High-Speed & High-Accuracy Control Mode 1 | 33.7 KBPM | |
| High-Speed & High-Accuracy Control Mode 2 | 67.5 KBPM | |
| High-Speed & High-Accuracy Control Mode 3 | 135 KBPM | |
| Maximum Look-Ahead Blocks | 1,350 (G05P20000) | |
| Operator Panel Program Transfer Method | SD Card | |
| Machine Dimensions & Weight | ||
| Overall Dimensions (L × W × H) | 6,490 × 5,120 × 4,430 mm | 255.51 × 201.57 × 174.41 in |
| Machine Weight | 22,000 kg | 48,502 lb |
| Electrical Power Supply | 400 V / 50 Hz | |
| Standard Equipment & Included Accessories | ||
| Enclosed Machine Cabin | Full enclosure, excluding roof | |
| Precision Roller-Type Linear Guideways | Included | |
| Portable Handwheel | Included | |
| Automatic Lubrication System | Included | |
| Spindle Oil Cooling System | Included | |
| Telescopic Guideway Covers | Included | |
| Coolant Nozzles Around Spindle | Included | |
| Linear Scales | Included / Machine Equipped with Linear Scales | |
| Side / Angle Head | Included with the Machine | |
| Tool Cart / Tool Trolley | Included with the Machine | |
| Tools on Tool Cart | Included with the Machine | |
| Key Machine Highlights | ||
| Configuration | 2023 ARION DV1922 CNC Double Column Bridge Machining Center equipped with Mitsubishi M80 CNC control, 2,200 × 1,900 × 900 mm axis travels, 1,900 mm distance between columns, 8,000 kg table capacity, BT50 spindle with 8,000 rpm maximum speed, 32-position automatic tool changer and linear scales. |
|
| Included Equipment | The machine will be supplied together with the side / angle head, tool cart and the tools currently located on the tool cart. | |
CNCBUL Industrial Machinery Solutions
Global Industrial Machine Solutions & Investment Advisory
Latest Guest Posts
Buying Guide
REQUEST MACHINE INSPECTION : used Amada LC3015 F1NT CNC Laser Machine 4kW – Year 2006 made in Japan
Home › Blog › Buying Guide › REQUEST MACHINE INSPECTION : used Amada LC3015 F1NT CNC Laser Machine 4kW –…
Read Guest Post →
Buying Guide
REQUEST MACHINE INSPECTION : used Matsuura VX-1000 CNC Vertical Machining Center Spindle 20,000 rpm – Year 2013 made in Japan
Home › Blog › Buying Guide › REQUEST MACHINE INSPECTION : used Matsuura VX-1000 CNC Vertical Machining Center Spindle 20,000…
Read Guest Post →
Buying Guide
REQUEST MACHINE INSPECTION : used Quintus Technologies AVURE (ASEA) QRL-63 Fluid Cell Forming Deep Drawing Cavity Forming Hydroform Press 6610 Ton
Home › Blog › Buying Guide › REQUEST MACHINE INSPECTION : used Quintus Technologies AVURE (ASEA) QRL-63 Fluid Cell Forming…
Read Guest Post →