| Category |
Specification |
Unit |
Amera Seiki VTC-5 |
Amera Seiki VTC-7 |
| Travel |
X-Axis Travel |
mm (in) |
2200 (86.61″) |
3200 (125.98″) |
| Y-Axis Travel |
mm (in) |
620 (24.41″) |
720 (28.35″) |
| Z-Axis Travel |
mm (in) |
620 (24.41″) |
620 (24.41″) |
| Spindle Nose to Table Surface |
mm (in) |
120 – 740 (4.72″ – 29.13″) |
120 – 740 (4.72″ – 29.13″) |
| Spindle Center to Column Surface |
mm (in) |
690 (27.17″) |
790 (31.10″) |
| Table |
Table Size |
mm (in) |
2500 × 600 (98.43″ × 23.62″) |
3500 × 600 (137.80″ × 23.62″) |
| T-Slots (Width / Number / Pitch) |
mm |
18 / 5 / 125 |
18 / 5 / 125 |
| Table Height from Floor |
mm (in) |
830 (32.68″) |
830 (32.68″) |
| Maximum Table Load |
kg (lbs) |
1800 (3,968 lbs) |
2500 (5,512 lbs) |
| Headstock |
Spindle Type |
– |
BT40 / CAT40 |
BT40 / CAT40 |
| Spindle Speed |
RPM |
8,000 (Optional 10,000) |
8,000 (Optional 10,000) |
| Feed Rate |
Rapid Feed (X/Y/Z) |
mm/min (IPM) |
32,000 (1,260 IPM) |
32,000 (1,260 IPM) |
| Cutting Feed (X/Y/Z) |
mm/min (IPM) |
1 – 10,000 (0.04 – 394 IPM) |
1 – 10,000 (0.04 – 394 IPM) |
| Power |
Spindle Motor (Continuous / 30 Min.) |
kW (HP) |
11 / 15 (14.7 / 20.1 HP) |
11 / 15 (14.7 / 20.1 HP) |
| AC Servo Motor (X/Y/Z) |
kW (HP) |
3.5 / 2.0 / 2.0 (4.7 / 2.7 / 2.7 HP) |
3.5 / 2.0 / 2.0 (4.7 / 2.7 / 2.7 HP) |
| Coolant System |
W |
580 |
580 |
| Lubrication System |
W |
25 |
25 |
| Spindle Chiller System |
W |
850 (Required over 8,000 RPM) |
850 (Required over 8,000 RPM) |
| ATC |
Tool Magazine Capacity |
pcs |
24 / 32 / 40 |
24 / 32 / 40 |
| Maximum Tool Diameter |
mm (in) |
70 (2.76″) / 127 (5.00″) with adjacent pocket empty |
70 (2.76″) / 127 (5.00″) with adjacent pocket empty |
| Maximum Tool Length |
mm (in) |
300 (11.81″) |
300 (11.81″) |
| Maximum Tool Weight |
kg (lbs) |
7 (15.4 lbs) |
7 (15.4 lbs) |
| Accuracy |
Positioning Accuracy |
mm |
±0.005 |
±0.005 |
| Repeatability |
mm |
±0.005 |
±0.005 |
| General Information |
Machine Weight |
kg (lbs) |
14,200 (31,306 lbs) |
23,780 (52,425 lbs) |
| Machine Dimensions (L × W × H) |
mm (in) |
4068 × 5810 × 3000 (160.16″ × 228.74″ × 118.11″) |
4168 × 6810 × 3000 (164.09″ × 268.11″ × 118.11″) |
| Required Air Pressure |
kg/cm² (psi) |
5 (71.1 psi) |
5 (71.1 psi) |
| CNC Controller |
– |
Fanuc 0i-MB |
Fanuc 0i-MB |
| Standard Equipment |
Full Enclosure Guard |
Standard on All Models |
| Rigid Tapping |
Standard on All Models |
| Remote Handwheel |
Standard on All Models |
| Halogen Work Light |
Standard on All Models |
| Beacon Light |
Standard on All Models |
| Automatic Power Off |
Standard on All Models |
| Automatic Lubrication System |
Standard on All Models |
| Spindle Air Purge System |
Standard on All Models |
| Spindle Air Blow System |
Standard on All Models |
| Coolant System & Electrical Cabinet Heat Exchanger |
Standard on All Models |
| Optional Accessories |
Controller Upgrade |
Fanuc 18i-MB, 21i-MB or Heidenhain |
| 10,000 / 12,000 RPM Spindle with Chiller |
Available on All Models |
| Coolant Through Spindle (CTTS) |
Available on All Models |
| ZF-2 Gear Head with Oil Chiller |
Available on All Models |
| Chip Flushing System |
Available on All Models |
| Chain Type Chip Conveyor |
Available on All Models |
| 4th Axis Interface |
Available on All Models |
