CUBIC MACHINERY GT mini PLUS CNC Machine Specifications
Origin: USA
Category: Lathe CNC Gang Type
Power and Efficiency – GT mini PLUS
| 5 HP inverter driven spindle motor | ● |
| 3 HP MITSUBISHI AC spindle motor | ○ |
| MITSUBISHI digital AC servo motors for X and Z | ● |
| FANUC 0i-Mate | ○ |
| Hydraulic pump unit for chuck/collet activation | ● |
| Automatic lubrication for sliding ways | ● |
| Rigid cast iron base | ● |
Time Saving Automation
| M-code controlled parts catcher | ● |
| Parts bin with mesh for coolant reclamation | ● |
| Magazine-style short bar feeder | ○ |
| 12 ft bar feeder | ○ |
| Bar extension | ○ |
| Bar feed interface (FEDEK DH-65 series) | ● |
Workholding
| 5C collet nose | ● |
| “Dead-length” 5C collet nose | ○ |
| 4” hydraulic 3-jaw chuck | ○ |
| 4” hydraulic 2-jaw chuck | ○ |
| 5W collet nose | ○ |
Tooling
| ID tool holders (3) | ● |
| OD / Cut-off tool holders (2) | ● |
| Tool holder bushings (1 set) | ● |
| 3/8” or 1/2” center height Hardinge-style toolings | ○ |
Productivity & Convenience
| USB interface | ● |
| PC-card interface | ● |
| RS-232 serial interface for program uploads | ● |
| Foot switch for collet/chuck open-close | ● |
| LED work light with adjustable arm | ● |
| 2-color LED signal light tower | ● |
Coolant, Chip & Thermal Management
| Programmable coolant system | ● |
| On-table coolant delivery | ○ |
| Stainless steel high-pressure coolant nozzles | ○ |
| Coolant level indicator with temperature gauge | ● |
| Chip pan with pull-out handle | ● |
| Chip conveyor (belt-type) and chip cart | ○ |
| Dedicated heat exchanger for electronic panel | ● |
| Separate external enclosure for braking resistor | ● |
| Automatic lubrication unit | ● |
Safety, Service & Diagnostic
| Electrical cabinet locks | ● |
| Front door interlock | ● |
| Steel braided cable sheath in machining area | ● |
| Screwless service access panels | ● |
| Toolkit and toolbox | ● |
| Firetrace fire suppression | ○ |
| CE mark | ○ |
Capacity
| Max. Turning Diameter | 60 mm (2.36”) |
| Max. Turning Length | 110 mm (4.33”) |
| Swing over Cross Slide | 120 mm (4.72”) |
| X Axis Travel | 233 mm (9.20”) |
| Z Axis Travel with Part Catcher | 147 mm (5.75”) |
| Z Axis Travel without Part Catcher | 170 mm (6.69”) |
Work Holding
| Spindle Bore | 34 mm (1.34”) |
| Bar Capacity | 27 mm (1.0625”) |
| Spindle Nose | 85 mm (3.35”) |
| Hydraulic Chuck | 101.6 mm (4”) |
Performance
| Spindle Motor | 3.72 kW (5 HP) |
| Spindle Speed | 100 – 6,000 rpm |
| Rapid Traverse | 18 m/min (712 ipm) |
Precision
| CNC Platform | 64-bit Mitsubishi E60 EZ Motion |
| Optional CNC Control | FANUC 0i-Mate |
| Minimum Input Unit | 0.001 mm (0.0001”) |
Tooling Capacity
| Max. OD Tool | 5/8” |
| Max. Boring Bar | 3/4” |
Dimensions & Weight
| Floor Space | 1200 × 1000 mm (48” × 40”) |
| Height | 1500 mm (59”) |
| Net Weight | 1,058 kg (2,332 lbs) |
Electrical Requirement
| Standard | 220V, 3 Phase |
| Optional | 440V, 3 Phase |
Warranty
| CNC Control | 2 Years |
| Machine Parts & Labor | 1 Year |
