CNC-TAKANG DCM 2132 CNC Machine Specifications

Send Inquiry
DCM 2132
“CNCBUL.com is redefining the future of industrial trade — transforming data and machine knowledge into global intelligence and trusted connections.” Invest in CNCBUL.com

Origin: Taiwan

MODEL DCM 2132
TABLE
Length 3000 mm (118.1\")
Width 1800 mm (70.8\")
T-slot (width × pitch × number) 22 mm × 150 mm × 11 (0.86\" × 5.9\" × 11)
Maximum load 15000 kgs
TRAVEL
Longitudinal travel (X axis) 3200 mm (126\")
Cross travel (Y axis) 2100 mm (82.6\")
Vertical travel (Z axis) 800 mm (31.5\") / 1100 mm (43.3\") (OPT.)
Distance from spindle end to table 180 ~ 980 mm (7” ~ 38.6”)
Distance from spindle center to column 430 mm (16.9\")
Distance between columns 2150 mm (86.4\")
SPINDLE
Spindle drive motor (Cont./30 min) 22 kw / 26 kw
Spindle speed 6000 rpm
Spindle taper BT50
FEED
Cutting feed rate 18000 mm/min
Rapid traverse (X / Y / Z) (m/min) 18 / 20 / 15
ATC
Tool storage capacity 24 tools
Tool size (full tools) Dia. 110 mm (4.3\")
Max. tool size (next pocket empty) Dia. 200 mm (7.8\")
Max. tool length 380 mm (14.9\")
Max. tool weight 18 kgs
Tool shank and pull stud BT50 45°
MISCELLANEOUS
Power requirement 40 ~ 50 KVA
Pneumatic requirement 6.5 kgs/cm²
Machine size length 8400 mm (331\")
Machine size width 4850 mm (191\")
Machine size height 4570 mm (180\")
Machine weight 29 ton
STANDARD ACCESSORIES
  1. Air blast through spindle
  2. Air blast work piece (nose)
  3. Coolant flushing system
  4. Automatic lubrication system
  5. Work light
  6. Operation status light
  7. Screw type chip conveyor & chain type conveyor
  8. Chain type 32-tool ATC
  9. Gear head
  10. Cooling system
  11. Z axis pneumatic balance system
  12. Air gun/water gun
  13. MPG hand wheel
  14. Heat exchanger
  15. RS-232 interface
  16. Rigid tapping
  17. Spindle oil cooler
  18. Adjusting tools & box
  19. Leveling bolts & pads
  20. Operation & programming manual
  21. Semi-full splash safety guard
OPTIONS
  1. Transformer
  2. Full splash guard
  3. Coolant through spindle
  4. Linear scales
  5. Auto tool length measurement
  6. Auto work piece measurement
  7. Manual universal head (90°)
  8. Auto universal head (90°)
  9. Rotary table
← Back to all CNC-TAKANG Machines

Other CNC-TAKANG Machine Models

LD 45 LD 45 DCM 3260 DCM 3260 DCM 2832 DCM 2832 DCM 3232 DCM 3232 DCMS-48 DCMS-48 TNC-40N × 1650 / 2150 / 2650 / 3150 TNC-40N × 1650 / 2150 / 2650 / 3150 DCM 2142A DCM 2142A DCM 4242 DCM 4242 DCM 1942 DCM 1942 DCM 1722 DCM 1722