CLAUSING CK Series CNC Machine Specifications
Origin: USA
Category: Lathe CNC Heavy Duty
| Machine Style | CNC Large Swing Lathe |
| Spindle Speed Control | Inverter Variable |
| Spindle (Hp) / Inverter (Hp) | 75 / 100 |
| Swing Over Bed (inch) | 50 – 80 |
| Swing Over Cross Slide (inch) | 29 – 60 |
| Max Weight Between Centers (lbs) – Standard | 33,000 |
| Max Weight BC w/ Steady (lbs) – Standard | 37,400 |
| Max Unsupported Chuck Weight (lbs) – Standard | 19,800 |
| Distance Between Centers (inch) | 82 – 476 |
| Bed Width Across V & Flat (inch) | 47.5 |
| Bed Height from Floor (inch) | 30 |
| Spindle Bore (inch) | 9.05 – 24.02 |
| Spindle Nose A-Mount | 11-20 |
| Number of Spindle Speeds | Variable (4-Auto Change) |
| Spindle Speed Range (rpm) | 3 – 300 |
| X-Axis Cutting Feed Rate (in/rev) | 0.00004 – 9.84 |
| X-Axis Rapid Rate (in/min) | 236.16 |
| Z-Axis Cutting Feed Rate (in/rev) | 0.00004 – 15.75 |
| Z-Axis Rapid Rate (in/min) | 314.88 |
| X Ballscrew Diameter (inch) | 1.97 |
| Z Ballscrew Diameter (inch) | 3.15 |
| Tailstock Quill Diameter (inch) | 9.25 |
| Tailstock Quill Type | Rotating |
| Tailstock Quill Travel (inch) | 7.87 |
| Tailstock Quill Taper | 6 MT |
| Coolant System | Yes |
| Voltage Required | 230 / 460 |
| Phase | 3 |
| Machine Footprint (L × W × H) | Based on Specific Model |
| Machine Weight (lbs) | Based on Specific Model |
| Notes | These weights can be increased with larger spindle bores and spindle bearings. |
| Machine Features | Fanuc Oi Control (other controls optional) 4-Way Bed System 4-range auto change AC variable drive with CSS control 7–700 rpm 9.05” spindle bore A2-11 nose mount with 12” ID spindle bearing Optional spindle bores up to 24.02” Hardened & ground bed ways and gears Turcite “B” between saddle & bed (reduced friction) Fully enclosed interlock guarding 75 Hp spindle motor / 100 Hp inverter (optional sizes available) Front & rear belt chip conveyor Electrical cabinet refrigeration Spindle oil refrigeration unit 4-way auto hydraulic turret Coolant system Automatic lubrication system Hydraulic tailstock with 9.25” rotating quill (programmable) and hydraulic body movement Halogen worklight Leveling screws & pads Optional CE electrics One-year warranty backed by Clausing Service Center |
