Description
LIEBHERR LCS 300 – 2006 Model
Gear max. 300 mm
Module Range 1 – 5 / 7
Helix Angle +/- 35 °
Distance Table Center to Tool Center 15 – 450 mm
Grinding Slide stroke vertical 600 mm
Tangential Travel / Shift Travel of Tool slide 200 mm
Minimum Number of Teeth 4
Grinding Spindle height above table min./ max. 60 – 660 mm
Grindingworm-x length/ Profile grinding disk Ø 145 x 210 / 175 mm
Speed of grinding wheel spindle 2.500 – 10.000 rpm
Speed of Table max. 800 rpm
Grinding Spindle Drive 28 kW – Total Load approx. 50 kW – 400 V – 50 Hz
Total weight of Machine approx. 15.000 kg
SIEMENS – CNC-Control Model 840 D is a further developed CNC version and software is
designed specifically for the gear manufacturing. The WINDOWS based Operator interface is
extremely operator friendly, and shows also error diagnostics in order to insure a high
production rate. Equipped with various grinding programs.
Automatic and contactless tooth meshing device to adjust the Grinding tool into the tooth gap.
A completely new grinding concept allows the use of CBN grinding worms and CBN grinding discs
on the same Grinding tool, therefore two two grinding methods can be utilized:
a. Generating grinding method using worm wheels ( for mass production)
b. Profile Grinding for high precision machining of small to medium batch production
c. Combination of both methods = roughing by using the grinding worm and finishing
using the profile disk insures highest accuracy.
High Speed grinding spindle up to 10.000 rpm/ 70 ms, spindle is cooled for thermal stability.
Automatic Workpiece handling system includes a two station ringloader which is mounted on
the counter bracket combined with a buffer conveyor make FLEX LINK outside of the machining area.
Therefore this is a high performance production unit which can be also used as a “lights out” operation
Cell.
Hydraulic Workpiece Clamping device but without clamping fixtures.
complete workarea protection with one sliding door. Separate CO 2 Fire extinguisher
Lifting Device for an easy change of the grinding tool
Not available: Original-Coolant device ( Central supply ) and Dressing Device for Grinding Tool
