Description
OKUMA LT2000EX – Year 2012
CNC Turning Center
TRAVELS:
X AXIS- X1, X2, X3: 8.07″, 8.07″, 8.07″
Z AXIS- Z1, Z2, Z3: 15.75″, 28.7″, 15.75″
Y AXIS- Y1, Y2, Y3: 3.74″, 3.74″, 3.74″
C AXIS- INDEXING 1, 2: .001, .001
W AXIS SUB SPINDLE: 29.92″
SPINDLE NOSE 1, 2: A2 -6, 140 FLAT
SPINDLE BORE DIAMETER 1, 2: 3.1″, 3.1″
SPINDLE SPEEDS 1, 2: 6000, 6000 RPM
SPINDLE HORSEPOWER 1, 2: 15, 15 HP
DISTANCE BETWEEN SPINDLES: 38.98″
TURNING DIAMETER: 8.27″
TURNING LENGTH: 5.12″
RAPID TRAVERSE RATES X1, X2, X3: 1181, 1181, 1181 IPM
RAPID TRAVERSE RATES Z1, Z2, Z3: 1575, 1575, 1575 IPM
RAPID TRAVERSE RATES Y1, Y2, Y3: 1260,1260, 1260 IPM
RAPID TRAVERSE RATE W AXIS: 591 IPM
TURRET TOOL POSITIONS 1, 2, 3: V16
TURRET ROTARY TOOL SPEEDS 1, 2, 3: 6000, 6000, 6000 RPM
TURRET ROTARY TOOL HORSE POWER 1, 2, 3: 7,5 7,5 7,5 HP
SWING OVER BED: 15.75″
CHUCK SIZE: 1, 2 COLLET, COLLET
BAR CAPACITY: 1, 2 2.56″, 2.56″
MACHINE WEIGHT: 21,560 LBS.
Equipped With:
OKUMA OSP P200L CNC CONTROL
SLANT Y-AXIS
HI-G CONTROL
NC TURRET
HEAVY TOOLING
SUB SPINDLE
B TURRET M AXIS
PROFILE GENERATE
PLANE CONVERSION
SYNC TAP. HELICAL
SLANT CUT
SPIN FLUCTUATE,
NC TORQUE LIMIT
LAP 4, NOSE R 2B
USER TASK 2
EXP. AUTO CHAMF
PROGRAM HELP
3D ANIMATION
BF/PC BIT SWITCH
PARTS CATCHER
BAR FEEDER I/F
Y AXIS UPPER AND LOWER TURRET
OSP P200 LA CNC COLOR CONTROL
AUTO PARTS CATCHER AND DISCHARGE CONVEYOR
LNS QUICKLOAD SHORT MAGAZINE BAR FEEDER RIGHT SIDE DISCHARGE CHIP CONVEYOR
(3) CHIP BLASTER UNITS WITH FILTRATION SYSTEM
19 ROTARY HEADS
