Description
Leadwell V-60iT – Year 2018
CNC 5-Axis Vertical Machining Center
X 50″
Y 40″
Z 30″
# Axis 5
Power 35 hp
RPM 15,000 RPM
# ATC 24
Taper Cat 40
Control CNC (Fanuc 0iMF)
SPECIFICATIONS
TRAVELS
X Axis 50”
Y Axis 40”
Z Axis 30.8”
Rotary Table top to spindle nose 34.7”
Spindle Center to Column 39.4”
C Axis (Rotating Axis) (degrees) 360°
A Axis (Tilting Axis) (degrees) +120° – – 30° (150° total)
TILTING ROTARY TABLE
Rotary Table Size (Diameter) 24.8” (630mm)
Max. Part Swing in Diameter at 0° (Tilting Axis “A”) 39”
Max. Part Swing in Diameter at 90° (Tilting Axis “A”) 32”
Max Part Height at 90° (degrees) (Tilting Axis “A”) 24.2”
Table Height from Floor 58”
Table Top Surface Precision Ground
Rotary Axis Brake Torque @500 psi (35 kg/cm2) –
(Hydraulic) 1085 lbf*ft (150 kgf*m)
Tilting Axis Brake Torque @500 psi (35 kg/cm2) –
(Hydraulic) 1447 lbf*ft (200 kgf*m)
Table Max. Load at 0°~ 45° Deg. At Tilting Position 1102 lbs.-peak (500 kg)
Table Max. Load at 60°~ 90° Deg. At Tilting Position 772 lbs.-peak (350 kg)
Table Tee Slots .. .551” (14mm)
SPINDLE
Spindle Nose (Dual Contact) BT-40 or CAT-40
Spindle Motor Power 35-47 HP (30min-peak)
164ft/lbs@1500 rpm
Spindle Speed 15,000 rpm
Spindle Motor Type FANUC α22i
Tool Clamping Force 1,870 lbs.
Spindle Bearings 6 Ceramic Angular Contact
(FAG or NSK)
24.8” dia Integrated Trunnion Table 47 HP Fanuc A/C Spindle Motor – peak rating
15,000 RPM Ceramic Bearing Spindle
1181 IPM Rapid X, Y & 787 IPM Rapid Z
Linears Ways X, Y axes & Box Ways Z-Axis
Dual Contact Spindle Taper – BT-40 or CAT-40
Coolant Thru the Spindle Preparation
40 Tools Arm Style ATC
Dual Screw Type Chip Augers and Chip Type Chip Conveyor
Spindle Air Blow to Clean Tool
Flood Coolant Unit & Spindle Coolant Ring
Base Wash
Spindle Oil Chiller
Alarm & Work Light
Full Guarding
Heat Exchanger for Cooling Inside Electrical Cabinet
Machine is Laser Calibrated for full travel accura
15,000 Ceramic Spindle
Fanuc 0iMF 200 Blocks High Speed Package
(200 Blocks, AICC II, Jerk Control & Smooth Tolerance Control,
Machining Quality Level & Machining Condition)
Renishaw NC4 F230-170 Non-Contact Tool Setter
Programmable Air Blast through coolant nozzle
Wash Down Gun
290 PSI CTS
Air Thru Spindle/Tool (via M11)
440 Volt Primary, 220 Volt Secondary Transformer
Renishaw MP-60 Probe w/CT 40 Shank, Including Inspection Plus
