Description
The double bender was used in a small tinsmith’s shop for the production of its own folded parts.
The double bender has the following operating data.
steel 400 N/mm² max. material thickness 1.50 mm
V2A 600 N/mm² max. material thickness 1.25 mm
Aluminium 190 N/mm² max Material thickness 2.00 mm
Bending cheek attachment rail 10 x 30 mm, 2-part
Double foot switch for clamping beam and automatic bending machine
Water fold groove
BMS Touch control with depth stop
electrical cutting apparatus as longitudinal division
steel 400 N/mm² max. material thickness 1.50 mm
V2A 600 N/mm² max. material thickness 1.25 mm
Aluminium 190 N/mm² max Material thickness 2.00 mm
In February 2020 the manufacturer carried out a general maintenance. The following services were performed:
– Installation of an oil cooler to keep the operating temperature of the hydraulic oil constant at high edge repetitions
– Hydraulic pressure test
– Switches clamping jaw stop replaced
– Leaks removed
– Cutting device tested
– Test bends performed
The minutes are available.