Description
HARMUTH CNC-FRÄSTECHNIK F3000 – Year 2015
CNC milling machine Harmuth F3000,
travel 3100x1560x120mm,
machine construction made of torsion-resistant aluminum (extruded profiles)
Drives are via ball screws (20x20mm X/Y and 16x5mm for the Z-axis)
Drive system stepper motors
All axles protected by bellows.
Positioning speeds X/Y 8m/min., Z 6m/min.
Adjustable steel feet.
Vacuum table: 15mm aluminum, milled in a “chessboard pattern” divided into 4 areas that can be adjusted via ball valves.
Integrated length measuring sensor for milling cutter length measurement.
suction device
Control electronics are installed in a switch cabinet directly on the machine
The connection to the computer is via EtherCad
2 configurable socket outlets e.g. suction and vacuum,
1 socket via main switch on and off for control computer
Machine control software “Penta-Tex” with drawing functions,
contour calculation, DXF, s4m and G-code import 3D processing,
automatic levels and milling cutter assignment from a DXF
Connection 400 volts, consumption in operation max. 1.5 kW, standby 100 watts.
Milling spindle ES 915 SK30 3.8 kW
300 – 24,000 rpm. with frequency converter (speed is controlled by the software)
Complete collet set, ceramic storage at the front / steel at the rear,
pneumatic tool change, 3 sensors, clamping range from 3 – 20mm.
Tool changer 10-fold
for cone holders, moves pneumatically from the work area so that no travel paths are restricted and a longer component can be pushed through.
incl. Control electronics, valves, software expansion and safety devices, we query the frequency converter whether the motor is at a standstill.
Cone holders 10 pieces for collets from 3 – 16mm.
Mist unit with solenoid valve, mist controlled by software.
Point laser for easier approach to a zero point
Vacuum pump pressure controlled up to 100Hz
SV 8. 160/2-48 – 380 mbar approx. 175m³/h 4kW, vacuum pressure can be preselected, the pump regulates the value as long as the power is sufficient.
industrial vacuum cleaner
3x 1200 watts, 80 liters, 270 mbar
Notebook with PentaTec software installed
The machine is operational and can be tested on site at any time.
This is a private sale, the selling price is final without VAT
