Description
HAAS UMC-1500SS-DUO – Year 2021
CNC 5-Axis Vertical Machining Center
| X | 60″ |
| Y | 20″ |
| Z | 20″ |
| # Axis | 5 |
| Power | 30 hp |
| RPM | 15,000 RPM |
| # ATC | 31 |
| Taper | CT 40 |
| Table-W | 18″ |
| Table-L | 32″ |
TRAVELS: S.A.E
X Axis: 60.0 in
Y Axis: 20.0 in
Z Axis: 20.0 in
Spindle Nose to Platter (~ max) 24.0 in
Spindle Nose to Platter (~ min) 4.0 in
SPINDLE S.A.E METRIC
Max Rating: 30.0 hp
Max Speed: 12000 rpm
Max Torque: 90.0 ft-lbf @ 2000 rpm
Drive System: Inline Direct-Drive
Taper: CT40 |
Bearing Lubrication: Air / Oil Injection
Cooling Liquid Cooled
B AXIS – TILT S.A.E
Travel: 120 ° to 35- °
Max Speed: 170 °/sec
Max Torque: 2240 ft-lbf
Brake Torque: 2000 ft-lbf
C AXIS – ROTATION: S.A.E
Travel 360 °
Max Speed: 179 °/sec
Max Torque: 1854 ft-lbf
Max Part Swing: 27.0 in
Brake Torque: 900 ft-lbf
PLATTER: S.A.E
Platter Diameter: 19.70 in
Max Weight on Platter: 660 lb
T-Slot Width: 0.626 in to 0.630 in
Number of Std T-Slots: 7
T-Slot Center Distance: 2.48 in
TABLE: S.A.E
Length: 32.0 in
Width: 18.0 in
T-Slot Width: 0.626 in to 0.630 in
T-Slot Center Distance: 4.92 in
Number of Std T-Slots: 3
FEEDRATES: S.A.E
Max Cutting: 650 ipm
Rapids on X: 1200 ipm
Rapids on Y: 1200 ipm
Rapids on Z: 1200 ipm
AXIS MOTORS: S.A.E
Max Thrust X: 2750 lbf
Max Thrust Y: 2750 lbf
Max Thrust Z: 3400 lbf
TOOL CHANGER S.A.E
Type:SMTC
Capacity:30+1
Max Tool Diameter (full): 2.5 in
Max Tool Diameter (adjacent empty): 5.0 in
Max Tool Length (from gage line): 12 in
Max Tool Weight: 12 lb
Tool-to-Tool (avg): 2.8 s
Chip-to-Chip (avg): 3.6 s
GENERAL: S.A.E
Coolant Capacity: 55 gal
AIR REQUIREMENTS: S.A.E
Air Required: 4 scfm @ 100 psi
Inline Air Hose: 3/8 in
Coupler (Air):3/8 in
Air Pressure Min: 80 psi
ELECTRICAL SPECIFICATION: S.A.E
Input AC Voltage (3 Phase) – Low 220 VAC
Full Load Amps (3 Phase) – Low 70 A
STANDARD FEATURES
High-Speed 30+1 Side-Mount Tool Changer
Wireless Intuitive Probing System
Control Cabinet Cooler
Control Touch Screen
Media Display M-Code; M130
HaasConnect: Remote monitoring
Early Power-Failure Detection Module
Ethernet Interface
WiFi Connection for the Haas Control
Safe Run
HaasDrop
Large Remote Jog Handle with Touchscreen Display
Rigid Tapping
Dynamic Work Offsets and Tool Center Point Control
High-Speed Machining
Standard Program Memory, 1 GB
Second Home Position
Power Surge Protection
PURCHASED OPTIONS
15,000-rpm Inline Direct Drive Spindle
Belt Type Chip Conveyor
Enclosure Exhaust
Through Spindle Coolant 300PSI
Air Vise Ready
WIFI Camera
TOOLHOLDERS AND FIXTURING NOT INCLUDED
