Description
GLEASON PHOENIX 200HG – 1992 Model
CNC HYPOID SPIRAL BEVEL GEAR GRINDING MACHINE
NEW 1992,
SUITABLE FOR THE HARD FINISHING OF SPIRAL BEVEL, ZEROL
BEVEL,AND HYPOID GEARS AND PINIONS UP TO 8″
(215.90MM) PITCH DIAMETER AT 5:1 RATIO, 1.6″
(40.65MM) MAXIMUM FACE-WIDTH,UTILIZING NON-DRESSABLE
PLATED CBN WHEELS, OR DRESSABLE WHEELS SUCH AS
CONVENTIONAL ALUMINUM OXIDE, SG, AND/OR VITRIFIED
CBN type
FEATURES / EQUIPMENT:
– MACHINE FURNISHED WITH FREE STANDING, AIR
CONDITIONED ELECTRICAL ENCLOSURE, W/OPERATOR’S
CONTROLS LOCATED AT MACHINE FRONT, ADJACENT TO
ACCESS DOOR
– GE-FANUC SERIES 150 COMPUTER CONTROL WITH GEAR
GRINDING SOFTWARE, 10.4″ LCD FLAT COLOR DISPLAY,
STORAGE CAPACITY FOR 100 SUMMARIES, CYCLE FAULT
MONITORING, AND AUTOMATIC SETUP AND CONTROL OF 7
AXES: (A ) WORK SPINDLE, (B) SWINGING BASE,
(C) WHEEL SPINDLE, (D) DRESSER, (X) HORIZONTAL,
(Y) VERTICAL, (Z) SLIDING BASE
– MACHINE ARRANGEMENT AS 200HG GRINDER
– MANUAL STOCK DIVIDING SYSTEM
(MISSING MANUAL STOCK-DIVIDER & MOUNTING BRACKET)
– WHEEL DRESSING UNIT (DRESSING CYCLE VIA CNC)
– WORK-PIECE ADAPTOR ON WORK-SPINDLE
– TOTALLY ENCLOSED WORK-AREA GUARDING W/POWERED
ACCESS DOOR
– WORK CHAMBER LIGHTING
– HYDRAULIC WORK PIECE CHUCKING WITH DRAW-ROD
– FLOODED SUCTION-TYPE HYDRAULIC UNIT
– SMOKE AND MIST COLLECTOR/SYSTEM
– WHEEL LIFTING DEVICE
– GRINDING WHEEL LENGTH GAUGE
– DRESSING TOOL WEAR GAUGE
– ROUGH WHEEL DRESSING TOOLS
– FINISH WHEEL DRESSING TOOLS
– COMPLETE COOLANT AND FILTRATION UNIT W/CHILLER FOR GRINDING & HYDRAULIC OIL.
– ASSORTED WHEEL ADAPTORS AND MOUNTING EQUIPMENT
– BALANCE MEASURING DEVICE
– FULL COMPLEMENT OF ELECTRICS, (MOTORS/CONTROLS) ELECTRICAL / HYDRAULIC CONTROLS TO EC
SPECIFICATIONS (400 VOLT, 50 HZ)
– GOOD ASSORTMENT OF ELECTRICAL SPARES & DRIVES FOR 150 CONTROL
– MISC. WRENCHES, SPANNERS, OPERATOR’S TOOLS
– MACHINE LEVELING SHOES,
