Description
ESCOFIER FLEX M20 E Thread Rolling Machine – Year 2012
CNC THRU-FEED/IN-FEED THREAD ROLLER 20 Ton
EQUIPPED WITH:
Siemens Simatic Panel CNC Control
Automatic Lubrication
Coolant System (220 L Tank, 10 to 20 L/MIN)
Large Quantity Of Threading Dies w/Rack
CATALOG SPECIFICATIONS:
Workpiece Diameter, Maximum 1.2″ 30 MM
Workpiece Diameter, Minimum 0,39″ 10 MM
Workpiece Diameter Outside Rolling, Max 4.84″ 123 MM
Working Center Distance, Maximum 11.2″ 285 MM
Working Center Distance, Minimum 5.31″ 135 MM
Rolling Force Tonnage 20 TONS 200 kn
Roll-Die Shaft Diameters 2.75″ 69.85 MM
Rolling Shaft Length, Range 3.9″ to 6.3″
Rolling Shaft Length, Range 100 to 160 MM
Roll Die Diameter, Maximum 8.66″ 220 MM
Roll Die Diameter, Minimum 5.9″ 150 MM
Roll Die Rotation Speed, Range 1 to 50 RPM
Rotation Speed, Phasing Adjustment 1 to 10 RPM
Shaft Inclination, Helical Correction +/- 6-DEGREES
Shaft Inclination, Taper Correction +/- 22-DEGREES
Shaft Inclination, Taper Correction +/- 7.8/1000 CONE
Overall Dimensions, L x W 98″ x 86″
Overall Height 86″
Weight Approximately 13200 LBS 6000 KG
NOTE: The Purpose Of This Machine Is To Cold-Form
Profiles By Rolling, Such As Threads, Splines, Gears,
Worm Screws, etc. On Steel Workpieces Produced
By Conventional Rolling Or Produced From Sintered
Powders. Two Thread Rolling Modes Are Used By
Positioning Based On The Programming. Plunge-Feed
Thread Rolling For Short Workpieces. Thru-Feed Thread
Rolling For Long Workpieces.
20 TON ESCOFIER “FLEX M20 E” CNC HORIZONTAL
THRU-FEED/INFEED THREAD ROLLER
New 2012, Serial No 20039,
Model Flex M20 E
