Description
Ermaksan CNC HAP 2600 X 80 – Year 2005
Press Brake 80 Ton
| Strength | 80 T |
| Folding length | 2600 mm |
| Distance between uprights | 2050 mm |
| CNC | CYBELEC DNC 60 |
| Vertical stroke | 180 mm |
| Working speed | 9 mm/s |
| Motor power | 7.5 kW |
| Ermaksan CNC HAP 2600 X 80 | Press Brake |
| Length x width x height | 3100.0 × 2000.0 × 2680.0 |
| Weight | 5600 kg |
Technical data of the ERMAK HAP 2600 X 80 CNC hydraulic press brake
– maximum pressing force: 80 t (800 kN)
– maximum detail length: 2600 mm
– maximum detail thickness: 6 mm
– feed of the beam with bumpers in the X / R axis: 500/160 mm
– bending speed: 9 mm/s
– return speed: 70 mm/s
– travel speed: 80 m/s
– slide stroke: 180 mm
– reach: 400 mm
– table height: 900 mm
– distance between side walls: 2050 mm
– safety distance: 1500 mm
– hydraulic pump motor power: 7.5 kW
– oil tank capacity: 150 l
– maximum oil pressure: 135 bar
– ambient temperature: 0-50°C
– noise level: 70 dBA
– power supply: 3x380V; 50/60 Hz
– dimensions (length x width x height): 3100 x 2000 x 2680 mm
– weight of the HAP 2600 X 80 machine: 5600 kg
ERMAK HAP 2600 X 80 CNC press equipment
– CNC controller: CYBELEC DNC 60
– light curtains: FIESSLER ELEKTRONIK
– emergency button (foot control)
– tooling installed on the machine
For the ERMAK CNC HAP-2600X80 press offered, it is possible to purchase the tooling visible in the photos on the pallet, for an additional fee of ….
CNC press brake ERMAK HAP 2600 X 80 built in 2005 by the Turkish concern ERMAKSAN MAKINA SANAYI TIC. LTD. ŞTI. is used in the processing of sheet metal with a maximum length of 2600 mm and a thickness of 6 mm. A very efficient bending machine performs bending of details with a force of 80 tons in the X and R axes, guaranteeing the highest precision and accuracy of machining while maintaining a high level of safety of use. The machine operator is protected by safety curtains by FIESSLER ELEKTRONIK, which effectively prevent unauthorized entry into the working area of the CNC press. All parameters of the bending process are programmed using the CYBELEC DNC 60 numerical control located on the movable arm. The total weight of the HAP 2600-80 press brake is 5600 kg.
