Description
CMZ TA 25 YS640 – Year 2021
CNC Lathe
Brand : CMZ
Model: TA-25-YS-640
Fanuc 32iTB control with 15 “touch screen and new iHMI.
Standard equipment for TA series:
Interpolating and bidirectional compensation of mechanical errors by laser measurement.
Main spindle:
Oil-cooled main spindle unit
Foot pedal for opening and closing the chuck
Load indicator for main spindle motor
Safety device against chuck opening in case of hydraulic pressure drop
C-axis on main spindle (TA-15/20/25/30-M,Y,TM,TY,MS and YS):
Full C-axis with positioning and clamping every 0.001 degree
Direct encoder system for maximum precision
Hydraulic disc brake for C-axis
Switching from spindle to C-axis mode without approaching the zero point
Counter spindle (TA-15/20/25/35 -S,MS and YS)
Oil spindle cooling
Full clamping cylinder
Foot pedal for opening and closing the chuck
Load indicator for spindle motor
LPS in counter spindle
Safety device against chuck opening in case of hydraulic pressure drop
C-axis on counter spindle (TA-15/20/25/35-MS and YS):
Full C-axis with positioning and clamping every 0.001 degrees
Direct encoder system for maximum precision
Hydraulic disc brake for C-axis
Switching from spindle to C-axis mode without approaching the zero point
Spindle synchronization (TA-15/20/25/35 -S,MS and YS)
High speed spindle synchronization via optical fiber cable (incl.
angle synchronization in TA-15/20/25/35-S,MS and YS)
Part transfer to counter spindle with programmable transfer pressure via B-axis
Tool turret:
12 positions servo turret with hydraulic clutch
Locking of turret disc via 3-fold toothed rim, 230 diameter
Changeover time 0.15 sec. (station to station) due to switching without lifting the
turret disc
Driven tool (TA-15/20/25/35-M,TM,Y,TY,MS and YS)
Driven by Gleason gearing (curved gearing), hardened and ground
Direct tapping / Rigid tapping
All stations driven
Helical interpolation (circular interpolation in 2 axes and simultaneous linear interpolation with a third axis)
interpolation with a third axis) GOM704A2600
Miscellaneous:
Electronic handwheel
Parts counter
Complete hydraulic equipment and installation
Automatic lubrication system
Safety monitoring against malfunctions on the lubrication system
Extra pipe to discharge used lubricating oil. Thereby no
contamination of the coolant
Complete installation of coolant circuit with electrical system, pump and tank
Easy access for cleaning the coolant tank
Complete electrical installation at 400 volts 50 Hz
Heat exchanger on the control cabinet – thus no direct connection of the control cabinet to the outside air
outside air
Work area light
Unimag bar feeder software interface
Transport and lift kit incl. 3 Kevlar ropes
Closed splash guard
1 set of service tools
Operating manual (Operation and programming manuals)
Electrical diagrams and maintenance manual
Accessories for TA series:
Machine language German
G Codes type A in Fanuc control
Machine manuals in pdf format available for download on cloud.cmz.com
Tool turret standard with 12 positions
Hydraulic hollow clamping cylinder (standard) in main spindle (TA25 Autoblok VNK 150-67)
LPS in hydraulic cylinder of main spindle
Adjustable blow-off device for main spindle
BHD 250 3 jaw power chuck in main spindle with a set of soft top jaws
Hainbuch Nova Combi Axzug 65 (standard) Collet chuck for main spindle
BBD 175 3 jaw power chuck for counter spindle with one set of soft top jaws
Hainbuch Nova Kombi Axfix 65 (standard) collet chuck for counter spindle
Tool presetter (tool presetter)
Side chip conveyor for Z=640 bed (standard version)
Machine status light
Tool life management
Tool load monitoring
High pressure coolant pump with three programmable pressure levels (35, 15 and 6 bar), incl.
replaceable 75 mm filter
Coolant wash nozzle
Programmable, automatic parts catcher (pneumatic) with conveyor belt
Interface for bar feeder (unimag)
Pneumatic ejector of counter-spindle with 100 mm adjustable travel
Coolant supply through counter spindle
Preparation for suction, connection flange d=200
Optional tool holder
4 x holder for tools for counter spindle
Holder for parting tool
2 x holders for drilling tools 40 mm
2 x reducing bush d=25-40
2 x reducing bush d=32-40
4 x double boring bar holders d=32
2 x reducing bush d=10/32
2 x reducing bush d=12/32
2 x reducing bush d=16/32
2 x reducing bush d=20/32
2 x reducing bush d=25/32
3 x double axial holder AGW (max. 8,000 rpm)
2 x Radial holder for AGW with internal coolant supply (Max. 12.000 rpm)
Loading magazine IRCO Breuning MUK 7012
Counter reading as of 03/30/2023: 3,611 hrs, run in one shift
Transport ex HVD, here the risk is transferred to the customer.
Transport, bringing in and installation at the customer pays customer
Year of manufacture of the machine 2021
