Description
Amada MEISTER V3 – Year 2006
CNC SURFACE GRINDER
6″ x 14″ Amada Meister V3 “CNC”
“MADE IN JAPAN”
“HIGH PRECISION – HIGH PRODUCTIVITY”
SURFACE & PROFILE GRINDER
S/N: 22210173 NEW: 2006
SPECIFICATIONS:
TABLE WORKING SURFACE ……. 17.7″ x 5.9″
MAX. LONGITUDINAL TRAVEL …. 19.6″
MAX. CROSS TRAVEL ……….. 7.8″
SPINDLE CENTER TO TABLE ….. 15.7″
LONGITUDINAL TABLE SPEED …. 3′ – 131′ FPM
MAX. No. OF TABLE
MRECIPROCATIONS WITH
0.591″ STROKE ………….. 250
CROSS/SADDLE FEED:
RAPID CROSS FEED, JOG (3)…. 0 – 1312FT./MIN.
1,640 FT./MIN.
3,280 FT.MIN.
HANDLE FEED, PER REV. …… 0.0004″, 0.004″,
0.04″, 0.15″
HANDLE FEED,PER GRAD. …… 0.000004″, 0.00004″,
0.0004″, 0.0015″
MINIMUM FEED INCREMENT …… 0.0000010″
POSITION DETECTION SYSTEM … GLASS SCALE/0.05um
WHEELHEAD:
RAPID WHEELHEAD FEED (JOG) .. 3.9″/MIN. & 39″/MIN.
HANDLE FEED, PRE REV. …… 0.0004″, 0.004″,
0.04″, 0.15″
HANDLE FEED,PER GRAD. ……. 0.000004″, 0.00004″,
0.0004″, 0.0015″
MINIMUM FEED INCREMENT …… 0.0000010″
POSITION DETECTION SYSTEM … LINEAR SCALE/0.05um
WHEEL SPINDLE:
SIZE (OD x WIDTH x BORE) …. 8″ x 1/4″ x 1- 1/4″
WHEEL SPINDLE SPEED,
INF. VAR. …………….. 500 – 5,000 RPM
MOTOR ………………….. 3 H.P.
FLOOR SPACE …………….. 74″ x 58″ x 74″H
APPROX. MACHINE WEIGHT …… 4,840 LBS.
MACHINE FEATURES:
FANUC 20i-F CNC
– SIMULTANEOUS 2-AXIS + 1 AXIS
– COLOR CRT GRAPHIC DISPLAY
– AXES DISPLAYED, X, Y & W
– EASY TO USE CONVERSATIONAL SOFTWARE
– (1) MULTI WORK GRINDING
(2) SURFACE GRINDING
(3) SLOT GRINDING
(4) PATTERN GRINDING
(5) CONTOURING GRIND
(6) PATTERN C.
(7) PROFILE DRESSING
(8) PATTERN D.
(9) R. TAPER
(10) SETTING
– FULL KEYPAD WITH G-CODE PROGRAMMING
– ORIGINAL SOFTWARE (MEISTER VERSI0N 2.06)
ALLOWS OPERATOR TO BE PRODUCTIVE
WITHOUT HAVING TO KNOW COMPLEX
CNC PROGRAMMING.
– PATTERN GRINDING COMPLEX SHAPES CAN BE
PROCESSED EASILY BY COMBINING FIVE PATTERNS.
THE COMBINATION OF PLUNGE AND TRAVERSE
OPTIONS MAKES SELECTING THE APPROPRIATE
PROCESSING EASY.
– CONTOUR GRINDING CAN BE IMPLEMENTED BY
INPUTTING THE GRAPHIC DATA OF ARBITRARY
SHAPES. ROUGH GRINDING BY PLUNGE
GRINDING CAN ALSO BE IMPLEMENTED,
AND THE CREATED DATA CAN BE SAVED
IN THE CNC AREA.
– PATTERN DRESSING BY INPUTTING THE DIMENSIONS
REQUIRED FOR THE BASIC SHAPE ON THE SCREEN,
THE GRINDSTONES PERFORM THE MOLDING USING
A SIMPLE PROFILE DRESSER. THE GRINDSTONES
CAN ALSO PERFORM THE MOLDING DURING THE
PROCESSING AND INTERRUPT DRESSING.
– HIGH SPEED TABLE RECIPROCATION, AMADA WASINO’s
PROPRIETARY POSITIONING SCALE AND HYDRAULIC SERVO
SYSTEM CAN ACHIEVE 250 TABLE REVERSALS PER MINUTE,
A SIGNIFICANT INCREASE IN GRINDING EFFICIENCY.
– TABLE FEATURES “V-FLAT” SLIDEWAYS WITH HOLLOW
RUNNERS FOR HIGH SPEED AND ACCURACY. MEISTER
SERIES GRINDERS SUPPORT RECIPROCATION SPEEDS
TWO TO THREE TIMES FASTER THAN ANY FORMER
MODEL, GREATLY IMPROVING EFFICIENCY.
– FANUC AC SERVO DRIVES
– HANDWHEELS FOR TABLE & SADDLE MOVEMENTS,
CROSS FEED HANDWHEEL IS ELECTRONIC,
MANUAL PULSE GENERATOR MOUNTED ON RIGHT
OF TABLE AT ERGONIC HEIGHT, FOR EASE
OF OPERATION.
EQUIPPED WITH:
6″ X 13.78″ ELECTRO-PERMANENT MAGNETIC CHUCK,
MADE BY “KANETEC” IN JAPAN FOR AMADA WASINO,
WITH VERY LOW HEAT EMITTED, PERMITS FINER,
SMALLER WORKPIECES TO BE HELD WITHOUT
HEAT DISTORTION.
VARIABLE HOLD NEUTROFIER CONTROL
3-DRESSER ARRAY MOUNTED ON TABLE,
TO THE LEFT OF THE CHUCK
“FUJI” COMBINATION DUST COLLECTOR & COOLANT SYSTEM,
WITH PAPER FILTRATION
“DAIKO OIL COOLING UNIT, USES DTE 22 Oil
FACTORY INSTALLED STAINLESS STEEL GUARIDNG IN
GRINDING POCKET.
WORK LIGHT
LEVELLING BLOCKS
ORIGINAL TOOL KIT
SET OF MANUALS
3 HP AC MOTOR WITH INVERTER DRIVE, PROVIDING
INFINITLEY VARIABLE SPINDLE SPEEDS
MACHINE IS WIRED FOR 3/60/208 VOLTS
** SUPERIOR CONDITION FROM A SMALL SHOP – OWNER RETIRED **
** ORIGINAL PAINT – EXCEPTIONAL APPEARANCE
– RUNS BEAUTIFULLY! **
** INSPECT UNDER POWE
