turning diameter over bed 400 mm
centre distance 1000 mm
Delivery time prompt, subject to prior sale
centre height: 200 mm
turning diameter over bed: 400 mm
turning diameter over cross slide: 235 mm
turning diameter in the crank: 550 mm
bed width: 320 mm
centre distance: 1.000 mm
Spindle mount / DIN55027: No. 6
spindle bore: 52 mm
Spindle taper: MK 6
Speeds (12): 50-2,240 rpm
Main engine: 4 kW
Number of feeds: 80
longitudinal feed: 0.015 – 0.6 mm/rev
Cross feed: 0.0075 – 0.3 mm/rev
number of threads: 40
Metric: 0.25 – 7.5 mm
inch: 120 – 4 gears/”
Module: 0.0625 – 1.875
DP: 480 – 16
adjustment range cross slide: 235 mm
adjustment range top slide: 110 mm
tailstock quill diameter: 50 mm
Tailstock recording: MK 4
tailstock quill travel: 100 mm
Length: 2.750 mm
Width: 1.100 mm
height: 1.600 mm
Weight approx.: 1.540 kg
3 axis digital readout FAGOR Innova-30i-T quick change tool holder Multisuisse incl. 4 holders (3x rectangle, 1 round) Lynette 3-jaw chuck Bison 3204/DIN6350, Ø 200 mmSpindle nose no. 6 according to DIN 55027 Rapid feeds (4) Fixed grains Coolant equipment Removable bridge1 pcs. Flange plate for lathe chuck Ø 200 mm1 Adapter sleeve Rear chip splash guard over the entire length Guide and feed spindle cover Protection for the lathe chuck Toolholder protection Levelling bolts and plates Tailstock with quick clamping Low-voltage machine light Operating manual Equipment according to “CE “This machine is used in our workshop for repair purposes
