← Back to Machine List

Yama Seiki (AWEA) AF1060 CNC Vertical Machining Center – Year 2017

Yama Seiki (AWEA) AF1060 CNC Vertical Machining Center – Year 2017

SPECIFICATIONS:
• TABLE WORKING SURFACE….. 47” x 23.6”
• TABLE LOAD CAPACITY….. 1,540 LBS.
• TRAVELS (X, Y, Z)….. 41.7” x 23.6” x 23.6”
• SPINDLE CENTER to COLUMN ….. 31.49””
• SPINDLE NOSE to TABLE TOP….. 3.93” – 27.55”
• RAPID TRAVERSE RATE, X&Y….. 1890 IPM
• TOOL CHANGER ARM STYLE….. 36
• TOOL CHANGE TIME….. 1.6 Sec Tool to Tool
• SPINDLE HORSEPOWER….. 40 HP (peak rating)
• SPINDLE SPEEDS RANGE….. 15,000 RPM (Direct Drive)
• SPINDLE TAPER….. CAT-40
• WEIGHT ……… 15,400 LBS.

EQUIPPED WITH:
• FANUC Oi-MF with 10.4” Color LCD Monitor
• FLASH DRIVE, RS-232 PORT, ETHERNET
• FANUC AICC with 200 Block Look Ahead
• 2MB MEMORY
• RIGID TAPPING
• (2) CHIP AUGERS and (1) CHIP CONVEYOR
• SPINDLE OIL CHILLER
• BIG PLUS SPINDLE
• CHIP WASH DOWN / COOLANT PUMP / OIL SKIMMER
• COOLANT THRU SPINDLE PREP FOR 1000 PSI
• 4th AXIS PRE-WIRE
• MPG (MANUAL PULSE GENERATOR) HANDWHEEL for FANUC
• HOURS: Power On: 7991 / Cut Time: 2119

LOW HOUR Vertical Machining Center with FANUC Control
15,000 RPM SPINDLE & 36 STATION TOOL CHANGER

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Used CNC Slant Bed CNC Lathes For Sale Paid Guest Post
13/04/2026 • 2 min read

Used CNC Slant Bed CNC Lathes For Sale

Used CNC Slant Bed CNC Lathes For Sale Category CNC Type Slant Bed CNC Lathes # Machine Description 1 Mazak…

Read Guest Post →
Avoid Costly Mistakes: Professional Tips for Purchasing a Pre-Owned, Surplus, Second-Hand, Used HARDINGE-BRIDGEPORT V-1000 CNC Vertical Machining Center made in USA Used Machines For Sale
12/04/2026 • 3 min read

Avoid Costly Mistakes: Professional Tips for Purchasing a Pre-Owned, Surplus, Second-Hand, Used HARDINGE-BRIDGEPORT V-1000 CNC Vertical Machining Center made in USA

Professional Buyer Guide – Avoid Costly Mistakes Machine Overview & Technical Specifications The Hardinge Bridgeport V-1000 is a high-performance vertical…

Read Guest Post →
What Should I Pay Attention To When Buying a Second-Hand, Pre-Owned, Surplus, Used Anayak Anak Matic-7 CNC Vertical Machining made in Spain? Used Machines For Sale
08/04/2026 • 3 min read

What Should I Pay Attention To When Buying a Second-Hand, Pre-Owned, Surplus, Used Anayak Anak Matic-7 CNC Vertical Machining made in Spain?

When evaluating a second-hand Anayak Anak Matic-7 CNC Vertical Machining Center (Spain), you should approach the purchase from both a…

Read Guest Post →