Tsugami B0385L – Year 2013
CNC Swiss Lathe
Manufacturer: Tsugami
Model: BO385L
Year: 2013
CNC Swiss Lathe Tsugami B0385L
| Capacity | 1.5″ |
| Power | 11 kW |
| RPM | 6,000 RPM |
| # Axis | 7 |
| Swiss, Chucker or Convertible? | Chucker |
| Main Spindle Indexing | Full C |
| Sub Spindle Indexing | Full C |
| Live Back Working Tools? | Yes |
| B-Axis? | Yes |
| Control | CNC (FANUC OITD) |
| Dimensions | 120″ x 60″ x 78″ + bar loader |
| Weight | 10,141 lbs |
General Specifications:
Axes: X1, Y1, Z1, X2, Z2, C1, C2
Working Barstock Diameter: 8 – 38mm
Machining Length: 100mm
Main Spindle Drill: 13mm
Main Spindle Tap: M12
Back Spindle Chucking: 38mm
Back Spindle Drilling: 12mm
Back Spindle Tapping: M12
Cross Drilling: 10mm
Cross Tapping: M8
Tool Spindle Slotting Cutter: 45mm
Back Drilling: 8 (op)
Back Tapping: M6 (op)
Main Spindle Speed: 200-6000 rpm
Back Spindle Speed: 100-7000 rpm
Tool Spindle Speed: 200-5000 rpm
Total Tool Storage (St/Max): 20/31
Tool Size: 20 x 20 x 125mm
Rapid Traverse Rate: 45m/min X1, Y1
24 m/min Z1
32m/min X2
Controlled Axes (linear axes) 5
Main Spindle Motor: 7.5 / 11kW
Back Spindle Motor: 3.7 / 5.5 kW
Axis Motors: 1.2 kW Z1
.75 kW X1, YY1
2.5kW X2, Z2
Cross Drill: 1.0 kW
Coolant Pump: 0.4 kW
Lubricating Oil Pump: 3 W
Power source Requirement: 30 kVA 3 phase 208V
Compressed Air Requirement: 4 MPa or above
Air Discharge Rate: 100 NL/min
Coolant tank Capacity: 195 L
Machine Dimensions: 120″ x 60″ x 78″
Machine Weight: 10,141 lbs
Description
Tsugami BO385L CNC Sliding Headstock Non-Guide Bushing Lathe, New in 2013
Equipped With
Fanuc 0i-TD CNC Control
MP Systems V-2 H08 High Pressure Coolant System (2000 psi)
3Nine Mist Collector
2013 LNS Turbo MH500 Chip Conveyor, high filtration
Edge Patriot 338 Magazine Bar Feed, 12′ cap
Firetrace Fire Suppression System
Patrol Light
