new TRENS SN50 C lathe.
The machine can be inspected under power
BASIC VERSION
– Metric version
– Spindle end bayonet B6 (DIN 55027 & ISO 702-III)
– Bore of the spindle Ø 52 mm
– Four-sided tool head
– Operating the lock case on the right
– with fast feed
– tailstock
– Main engine power 4.0 kW
– chip container + cooling
– LED lighting
– Power supply cable armoured hose
– fixed handle for axis X
– fixed handle for axle Z
– Chuck cover Ø 200 mm with limit switch
– CE version: front hood against chips, rear hood, lead screw protection and pull rod
– Colour – RAL 7035-3 / 7016-3 / 6153
– Set of change gears for thread cutting
– Shear pin 3 pieces
– set of tools
– Operating manual of the machine on CD, documentation
– fixed tip Morse 5
On request, we can add a digital display and a Multifix holder.
Please contact us for this.
Technical data
WORKSPACE:
– Swing diameter over the machine bed: 500 mm
– Swing diameter over the support: 270 mm
– Swing diameter at breakout: 700 mm
– Swing diameter in the breakout 670 mm
– useful length of the breakout from the front of the spindle end: 230 mm
– centre distance: 1000 mm
– centre height above the machine bed: 250 mm
– machine bed width: 340 mm
SPINDLE:
– Speed range: 22 – 2000 rpm
– Speed steps: 24
– Spindle end: ISO 702/III – B6 (optional ISO 702/II – D6)
– spindle bore: 52 mm
– Inner cone: Morse 6
– Max. Torque / limiting speeds: 1200 Nm / 45 rpm
SUPPORTS:
– Working range of the cross slide: 300 mm
– Working range of the tool slide: 140 mm
– Max. knife dimensions: 32 x 20 mm
– Number of feed steps: 38 mm
– Range of longitudinal work feeds: 0.05 – 6.4 mm
– Range of the working feeds crosswise: 0.025 – 3.2 mm
– rapid longitudinal feed: 3000 mm/min
– fast cross feed: 1500 mm/min
– Swivel angle of the tool slide: +/- 90
RIDDLER:
– Diameter of the centre sleeve: 70 mm
– Stroke of the center sleeve: 180 mm
– Inner cone of the tip sleeve: Morse 5
– transverse adjustment: +/- 12 mm
THREADS:
– Metric thread: 29x / 0.5 – 40 mm
– Whitworth thread: 35x / 1 – 80 mm
– Module thread: 26x / 0.25 – 20 mm
– Thread Diametral Pitch: 31x / 2 – 72 DP
DRIVES:
– Total power consumption: 6,6 kW
– Power of the main drive motor: 5.5 kW
– Cooling pump capacity: 0.09 kW
– Power of the rapid feed motor: 0.55 kW
DIMENSIONS:
– width x height: 1.100 x 1.580 mm
– length/weight: 2640 mm / 1753 kg
– voltage: 400V
