| General Information |
| Machine Type |
CNC Milling & Turning Center |
| Manufacturer |
Traub |
| Model |
TNX 65/42 |
| Year |
2007 (Commissioned 2010) |
| Serial Number |
7060107 |
| Condition |
Used – Under Power |
| Capacity |
| Chuck Size |
175 mm (6.89 in) |
| Bar Capacity |
65 mm (2.56 in) |
| Main & Sub Spindle Through Hole |
65 mm (2.56 in) |
| Spindle |
| Spindle Speed |
5,000 RPM |
| Spindle Power |
32 HP (23.9 kW) |
| Sub Spindle |
Yes (Coolant Flush Equipped) |
| Control System |
| CNC Control |
TX8is (Mitsubishi / Traub based) |
| Drives & Motors |
Mitsubishi |
| Total CNC Axes |
15 Axes |
| Turret & Tooling System |
| Number of Turrets |
4 (X-Y-Z Configurations) |
| Positions per Turret |
10 Positions |
| Max Tools per Turret |
Up to 20 Tools |
| Live Tooling |
Yes |
| Automation & Handling |
| Bar Feeder |
FMB Turbo 5-55 Magazine Type (2010) |
| Gantry System |
Servo Driven Gantry Receiver |
| Part Handling |
Finished Part Conveyor Belt |
| Gripper System |
Hydraulic Swivel with Pneumatic Finished Part & Bar Remnant Gripper |
| Chuck Control |
Foot Pedal Clamp / Unclamp |
| Coolant & Filtration System |
| Coolant Tank |
Knoll Coolant Tank with BKW Refrigerated Temperature Control |
| Coolant Filter |
RESY Paper Band Filter / Chiller |
| High Pressure Coolant |
20 Bar (290 PSI) |
| Low Pressure Coolant |
8 Bar (116 PSI) |
| Chip Conveyor |
Knoll |
| Tooling Package |
| Total Tool Holders |
66 Units (Some Brand New) |
| Included Types |
Axial & Radial Milling, Drilling, Boring Heads, ER Collet Holders, Twin Holders, Shell Mill Holders, Turning Holders, Cut-Off Holders |
| Special Equipment |
Rohm KFD-HS 160/2 2-Jaw Chuck, VDI Adaptor with Live Center Support |
| Spare Parts |
| Ball Screw Replacement Kits |
2 Complete Sets |
| Additional Components |
Buffers, Ball Screws, Clutches, Bearing Units |
| Total Spare Parts Value |
$11,450.38 |
| Amplifiers |
2 × Mitsubishi MDS-DH-V2-2020 (Rebuilt, 400V) |
| Location |
| Machine Location |
contact to us |
| Inspection |
Available Under Power |
