Toyoda Select G-100 45M CNC Grinder – Year 2004
Combination Straight or Angle Head CNC Grinder
Serial No. LG64502
SPECIFICATIONS
Swing over Table 12.59 inches
Distance Between Centers 39.37 inches
Grinding Diameter 0 – 11.81″
Maximum Load between Centers 330 pounds
Grinding Wheel Size (OD x W x Bore) 20″ x 4″ x 8″
Wheel Surface Speed 8500 SFPM
Wheelhead Travel 10.72 inches
Wheelhead Rapid Feedrate 393 IPM
Minimum Input Increment 0.0001mm
Table Travel 50 inches
Table Rapid Feedrate 393 IPM
Minimum Input Increment 0.0001
Swivel Angle of Table (CCW-CW) 10° – 0°
Workhead Center No.4 MT
Tailstock Stroke 1 inches
Wheelhead Spindle Drive 7.5 HP
Workhead Spindle Drive (AC Servo Motor) 1 HP
Approximate Dimensions 15’LR x 7’6″FB x 7’H
Approximate Weight 11500 pounds
F.O.B. Our Plant
EQUIPPED WITH
The Toyoda Select G-100 CNC Grinder Can Be Used As A Straight Or Angle Head Grinder.
GC32 CNC Control. Lateral Locator (Shoulder Gauge) Marposs E20N Grinder Acoustic Controller (Used For Checking Contact Between Wheel And Workpiece.
Wheel Position and Continuity of Dressing).
Dresser Behind Workhead. Power Tailstock. With Footswitch Control.
Manual Pulse Generator. Automatic Doors. Coolant System With Magnetic Separator.
Manuals And Drawings.
This machine is being offered thoroughly checked out in our shop, cleaned and cycled
The Toyoda Select appears to be in very good condition and can be inspected under power on our floor.
