← Back to Machine List

TOYODA GL4P-100EII Cylindrical Grinder – Year 1998

TOYODA GL4P-100EII Cylindrical Grinder – Year 1998

12.6″ x 39.4″ TOYODA CNC STRAIGHT WHEELHEAD cCYLINDRICAL GRINDER
Mfg No LG5964-1,
Brand : TOYODA
Model : GL4P-100EII,
Y.O.M. : 1998

EQUIPPED WITH:
#GC32 Toyoda CNC Control with CRT
Straight Type Wheelhead Design – Gauging
Table Mounted Diamond Roll Wheel Dresser
Combination Live/Dead Workhead
Combination Manual/Hydraulic Footstock
Foot Pedal – Hand Held Remote
Coolant System (Tank & Pump)

CATALOG SPECIFICATIONS:
Swing Over Table, Maximum 12.6″
Grinding Diameter, Maximum 11.8″
Distance Between Centers, Nominal 39.4″
Weight Capacity Between Centers 330 LBS
Grinding Wheel Diameter, Standard 16″
Grinding Wheel Width, Maximum 4″
Grinding Wheel Width, Standard 3″
Grinding Wheel Hole Diameter 5″
Table Swiveling Angle, CCW~CW 5~0 DEGREES
Wheelhead Feed Stroke, Total 9.76″
Workhead and Tailstock Center Tapers #4 MT
Grinding Wheel Speeds, Surface-Feet 8850 SFPM
Workhead Spindle Speeds, Infinite Range 10 to 500 RPM
Table & Wheelhead Rapid Feed Rate 591 IPM
Grinding Wheelhead Spindle Motor 7.5 HP
Floor Space, W x D 15′ x 9′
Weight, Approximately 10800 LBS

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Avoid Costly Mistakes: Professional Tips for Purchasing a Pre-Owned, Surplus, Second-Hand, Used HARDINGE-BRIDGEPORT V-1000 CNC Vertical Machining Center made in USA Used Machines For Sale
12/04/2026 • 3 min read

Avoid Costly Mistakes: Professional Tips for Purchasing a Pre-Owned, Surplus, Second-Hand, Used HARDINGE-BRIDGEPORT V-1000 CNC Vertical Machining Center made in USA

Professional Buyer Guide – Avoid Costly Mistakes Machine Overview & Technical Specifications The Hardinge Bridgeport V-1000 is a high-performance vertical…

Read Guest Post →
What Should I Pay Attention To When Buying a Second-Hand, Pre-Owned, Surplus, Used Anayak Anak Matic-7 CNC Vertical Machining made in Spain? Used Machines For Sale
08/04/2026 • 3 min read

What Should I Pay Attention To When Buying a Second-Hand, Pre-Owned, Surplus, Used Anayak Anak Matic-7 CNC Vertical Machining made in Spain?

When evaluating a second-hand Anayak Anak Matic-7 CNC Vertical Machining Center (Spain), you should approach the purchase from both a…

Read Guest Post →
What Industry Experts Recommend Before Purchasing a Pre-Owned, Second-Hand, Surplus, Used INDEX MS 42C CNC MultiSpindle Lathe 6 Spindles  made in Germany? Buying Guide
03/04/2026 • 3 min read

What Industry Experts Recommend Before Purchasing a Pre-Owned, Second-Hand, Surplus, Used INDEX MS 42C CNC MultiSpindle Lathe 6 Spindles  made in Germany?

The INDEX MS 42C is a German-engineered CNC multi-spindle automatic lathe designed for high-volume, precision turned parts production. It is…

Read Guest Post →