← Back to Machine List

Toyoda FH400J – Year 2016

Toyoda FH400J – Year 2016

Year 2016
Make Toyoda
Model FH400J
Toyoda FH400J CNC Horizontal Machining Center

 

Pallet Size 15.75″ x 15.75″
X-Axis Travel 23.62″
Y-Axis Travel 22.05″
Z-Axis Travel 24.8″
Tool Magazine Capacity 119 ATC
Spindle Speed 15,000 RPM
Spindle Taper 40 Big Plus
Pallet Indexing Full 4th Axis
Spindle Motor 30 HP
Max. Workpiece Swing 24.8″ X 35.43″
Rapid Traverse Rate 2,362 IPM
Table Top to Spindle Center 1.97″-24.02″
Full 4th Axis 360,000 Positions
Max. Work Load on the Pallet 880 lbs.
Pallet Height from Floor 43.31″

FEATURES

360 000 Degree NC Positioning B Axis Table
Big Plus Modification for All Series Spindles Laser Tool Measurement System
Multi Step Skip Function (Required for Use of Spindle Probe and Tool Measurement System) Operation Supporter – OP20T
RMP60 (Radio Transmission) AI Precision Control II
Hand Held Splash Gun Inverse Time Feed
Overhead Coolant Shower

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →
How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase Used Machines For Sale
13/01/2026 • 4 min read

How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase

Below is a professional, detailed guide for engineers and buyers on how to evaluate a pre-owned, used, second-hand, surplus CNC-Takang…

Read Guest Post →