TORNOS Swiss GT 26 – Year 2021
CNC Swiss Lathe
Sliding Headstock Lathe Type Swiss GT/26/6 II with Numerical Control, Fanuc 31i-B, 6axes, Capacity 25.4mm
Includes
Basic machine with 6 linear axes
Independent main & counter spindles
synchronous rotating bushing
adaptation kit wi wotk without a guide bushing
C Axis for main and counter spindle
adjustable pnuematic part ejector including counter spindle collet cleaning with coolant
3 colours light tower
cental lubrication system
electrical interfance for Tornos loader
Interfance for an oilmist extractor, fire fighting device, customers M fuctions (6 inputs and 6 outputs)
conformity to EC anc CEM norms
Main spindle
Max rpm of main spindle -10,000
adaptation for a F30 Collect
Bushing
Max RPM of the rotating bushing -10,000
Max diameter of synchrous rotaing bushing 25.4m
Bushing Type 227T
Tool System
Tool Plate for 5 turning tools 16x16m on the front side of platen
Tool plate for 4 turning tools 16x16m on the rear side of platen
S11 motorization (6,000 RPM) for rotating tools mounted on the front side of platen X1/Y1
1 rotating module for cross machining with 4 spindles for ESX20 Collet (3×6,000RPM and 1×4,000RPM)
S21 Motorization (6,000RPM) for up to 3 rotating units mounted on the rear side of platen X1/y1
Tool block woth 5 bores -22mm for steady end working tools to work in main/counter Ops
Tool Block with 2-22mm for steady end working tools located next to counter spindle
Counter Spindle
Max RPM of counter spindle 10,000
Adaptation for a F30 Collet
C4 axis fuction
Tool system for counter Operations
Support block for 8 back working tools with 4 upper positions open to receive steady and /or rotating tools
on the lower position we have 4 steady holders with 20mm shank for ESX16 Collet
2 steady holders for 22mm zero bore (for upper position)
S51 motorization (5,000RPM to drive the back working tools
Misc
Pneumatic part ejector including the colect cleaning with coolant
part chute
central lubrication system
high pressure pump
coolant tank
coolant flow detector
LNS GT 326-E /12 Magazine Bar Feeder
MP Systems High Pressure type AT S-2 O 8P
Macro Active Chip Beaker
LNS AFS Fox Mist Collector Model WS700
LNS Chip Conveyor MH500 Filtering Conveyor
Low Hours:
(1)1471 hours 98 parts– this machine only made brass cartridges
(2) 1228 hours 6788 parts– this machine only made brass cartridges
