TAKUMI SEIKI V11A – Year 2001
CNC Vertical Machining Center
Four (4) Box – Slideway System Eliminating Overhang For Maximum Table Support
* Hardened And Ground Box Way Construction For Superior Rigidity
* Large 1.97. Ballscrew Diameter
* 6,000 RPM Spindle Yields A Combination Of Speed And Torque Well Suited For A Broad Range Of Machining Applications
* A Standard Spindle Oil Cooler System Maintains Constant Temperature Throughout The Spindle Housing
* Swing Arm Cam-Type Automatic Tool Changer Has A Quick 2-1/2 Second Tool Change Time
SPECIFICATIONS:
* Ball Screw Diameter 1.97 in
* X-Axis Travel 43 in
* Y-Axis Travel 22 in
* Z-Axis Travel 25.6 in
* Table Size 53 in x 20 in
* Spindle Center To Column 22 in
* Spindle Nose To Table 5.9 in – 31.5 in
* Table Load 1,760 lbs.
* T-Slots .7 in x 5 in x 3.94 in
* Spindle Cat 40
SPECIFICATIONS: (CONT.)
* Spindle Speed 60-6,000 RPM
* Spindle Motor 15 Hp
* Rapid Travel:
* X-Axis 472 IPM
* Y-Axis 472 IPM
* Z-Axis 394 IPM
* Cutting Feed Rate:
* X-Axis 236 IPM
* Y-Axis 236 IPM
* Z-Axis 236 IPM
* Feed Increments:
* X, Y, And Z 0.0254 in
* Accuracy:
* X,Y, And Z-Axis Repeatability * 0.00019 in
* X,Y, And Z-Axis Positioning * 0.0001 in
* Ball Screw Class C-3
* Tool Changer:
* Capacity 24 Tool (Arm Type)
* Type Cat 40
* Tool Weight Max 17.6 lbs.
* Tool Diameter Max 3.55 in
* Tool Diameter Max (Adjacent Pot Empty) 7.1 in
* Tool Change Time 2-1/2 Seconds
* Weight And Dimensions:
* Net Machine Weight 16,500 lbs.
* Floor Space 143.4 in W x 108.4 in H x 131.6 in L
* Electrical Requirements:
* Voltage 220-Volt
* Transformer May Be Required For Voltages
Under 200 Or Over 230
* AC/3-Phase 20KVA/50A
* Air Requirement 85 PSI
STANDARD EQUIPMENT:
* Spindle Oil Cooler
* Coolant System
* Tool Box
* Air Blast Device
* Rear Spiral Conveyor And Flush Coolant
* Front Spiral Chip Conveyor
* MPG Box (Manual Pulse Generator)
* Fully Enclosed Guarding
STANDARD EQUIPMENT:
* CE Specifications (Meets International Industrial Safety Standards)
* Heat Exchanger For Electrical Cabinet
* Rigid Tapping
* RS-232 Interface
* 160 Meters Memory
ACCESSORIES INCLUDED:
-CNC-170 6.6 in CNC 4th Axis Rotary Table With Tailstock
TAKUMI SEIKI
Model V11A CNC Vertical Machining Center With
Mitsubishi 520AM CNC Control, 15Hp, 220-Volt, 3-Phase, 60Hz S/N G08022, 2001 Year Model
