TAKISAWA TM-2000Y2 CNC Turning Center – Twin Turret / Twin Y-Axis – Year 2022
Manufacturer: Takisawa
Model: TM-2000Y2
Machine Number: TJPM1003
Year of Construction: 2022
Condition: New / Demo Machine
Operating Hours: 173 h
Control: Fanuc 0i-TF Plus
Technical Specifications
| Specification | Metric | Imperial |
|---|---|---|
| Maximum Turning Length | 640 mm | 25.20 in |
| Turning Diameter | 215 mm | 8.46 in |
| Turning Diameter over Cross Slide | 215 mm | 8.46 in |
| Spindle Motor Power | 15 kW | 20 HP |
| Max Spindle Speed | 5,000 rpm | 5,000 rpm |
| Spindle Bore | 51 mm | 2.01 in |
| Maximum Bar Diameter | 51 mm | 2.01 in |
| X-Axis Travel | 190 mm | 7.48 in |
| Y-Axis Travel | 90 mm | 3.54 in |
| Z-Axis Travel | 660 mm | 25.98 in |
| Rapid Traverse X | 20 m/min | 787 in/min |
| Rapid Traverse Y | 40 m/min | 1575 in/min |
| Rapid Traverse Z | 12 m/min | 472 in/min |
| Rotational Speed (Max) | 6,000 rpm | 6,000 rpm |
| Electrical Supply | Three-phase | Three-phase |
Machine Configuration
Japanese Takisawa TM-2000Y2 CNC turning center equipped with
dual turret, twin Y-axis, sub spindle and Fanuc 0i-TF Plus controller.
Demo machine with only 173 operating hours.
Installed Options
- Kitagawa BB206 3-Jaw Chuck – Main Spindle
- Kitagawa B206 3-Jaw Chuck – Sub Spindle
- SMW (Mario Pinto) PPBE-42 Collet Chuck – Main Spindle
- SMW Collet Chuck – Sub Spindle
- Raku-Raku Monitor Controller Option
- Abnormal Load Detection Function
- High Pressure Coolant – 9 bar
- Bar Feeder Interface
- Remaining Bar Discharge Device
- Manual Tool Setter
- Workpiece Unloader with Conveyor
- Chip Conveyor
- Static Toolholders
- 2 × Axial Rotary Toolholder
