Tacchi FT 70-LS/600 x 2500 – Year 2001
| Max. boring Ø | 200 mm |
|---|---|
| Workpiece length | 2500 mm |
| Centre height | 1100 mm |
| Max. Ø | 1200 mm |
| Workpiece weight | 5000 kg |
| Spindle speed | 800 rpm |
| Spindle bore | 120 mm |
| Engine power | 60 kW |
Tacchi Model FT series 70-LS/600 x 2500
Deep Hole Drilling and Boring Machine
with bottle boring capability with Siemens 840 D CNC.
New 2001
Swing over Bed 1200 mm (47.24”)
Maximum drilling length 2500 mm (98.4”)
Maximum longitudinal travel Z 2500 mm (98.4”)
Maximum stroke (X axis ) 200 mm (7.87”) ( For Bottle boring )
Solid boring 20-220 mm (0.8 to 8.7”) dia.
Trepanning 50-300 mm (2”-12”) dia.
Max weight of workpiece 5000 kgs (11,000 lbs)
Chuck steel body 500 mm (20”) diameter with two piece steel jaws
Steady Rest 50 mm – 300 mm (2” to 12”) dia
Vibration damper up to 127 mm (5”)
Spindle Headstock motor 60Kw ( 80 Hp)
Number of gear ranges 3
Speed 5 to 800 rpm
Constant power at 50 to 800 rpm
Maximum torque 15,000 nm (11,000 lb/ft)
Spindle nose Din 55027 Size 15”
Spindle bore 120 mm (4.72”)
Drilling Head Motor 60Kw (80 Hp )
Number of gear ranges 2
Speed range 5 – 800 rpm
Constant power 60 – 800 rpm
Maximum torque 13,000 nm (9,588 ft lbs)
Spindle Nose Din 55027 Size 15”
Spindle bore 120 mm (4.72”)
Max pressure against workpiece 50,000 N (11,240 lbf)
Oil Pressure Head Carriage
Pumps variable capacity 100 – 800 litres/min (25 to 210 US GPM)
Pressure 40 bar
Drum Filter 800 litres / min ( 210 ppm)
Chip Conveyor
Belt width 350 mm (14”) wide
Loading length 9000 mm ( 29.5ft)
Discharge height above floor 1100 mm ( 43”)
Voltage 600 volts 60 Hz ( with Transformer )
Floor Space required 12,100 mm x 4,130 mm (39’9” x 13’6”)
