TACCHI FT 45 S CNC – 500 x 3000 – Year 2011
| Max. boring Ø | 550 mm |
| Workpiece length | 3000 mm |
| Centre height | 500 mm |
| Max. Ø | 1000 mm |
| Spindle bore | 128 mm |
| Engine power | 100 kW |
| Deep Hole Drilling Machine | |
| Weight | 42000 kg |
TACCHI FT 45 S CNC – 500 x 3000 – 2011 Model Deep Hole Drilling Machine
Model FT 45 S CNC – 500 x 3000
Year 2011
Control system SIEMENS 840 DE
Machine suitable for Rotating Workpiece and Stationary Tool.
Centre height 500 mm
Swing over bed 1000 mm
Width of bed 520 mm
Boring diameter capacity
Solid boring 20 – 280 mm
Trepanning 50 – 500 mm
Counter boring 550 mm
Max. boring depth 3000 mm
Work headstock
Range of spindle speeds (3 range) 4 – 600 rpm
Spindle nose 15 DIN 55026
Spindle bore 128 mm
Drive power (AC Brushless main motor) 100 kW
Maximum torque 25.000 Nm
Boring carriage
Feeds, infinitely variable 1 – 4000 mm/min
Rapid traverse 4000 mm/min
Feed force 50,000 N
Guide (Oil Pressure Head) carriage
Rapid traverse 4000 mm/min
Hydraulic approach stroke 150 mm
Hydraulic thrust, pressure head against workpiece 50,000 N
Electrics 380/415 V, 50 Hz
Total installed power 140 kW
Total load 230 A
Bed length approx. 10,000 mm
New weight of complete machine approx. 42,000 kg
Floor space approx. 13,000 x 5,000 mm
Machine equipped with :-
Coolant oil pumping station with 2 pumps, Flow rate 250-1600 lt/min., 10 bar.
BTA Rotating Oil Pressure Head, Size 218 S. Max. boring bar 346 mm. Boring bushes, rings and seals.
3 off boring tubes (154 mm and 226 mm x 4500 mm thread connection, 346 mm x 4500 mm flange connection).
Solid boring heads 255, 300, 350, 370, 380, 400 mm.
1 off 3 point roller work piece steady, 200 – 650 mm, capacity 6000 kg.
1 off boring tube steady, max. capacity 346 mm.
800mm ROHM 3 Jaw High Grip Geared Chuck.
Coolant tank, 16,000 litre.
Magnetic oil filtration 1600 lt/min.
