Supertec G38P-60NC Universal Cylindrical Grinder – Year 2017
Brand: SUPERTEC
Model: G38P-60NC
Year: 2017
Spec Sheet:
2017 Supertec G38P-60NC Universal Cylindrical Grinder
SPECIFICATIONS:
GENERAL CAPACITY
Distance Between Centers: 24″
Swing Over Table: 15″
Max. Grinding Diameter: 14″
Max. Load Held Between Centers: 330 lbs
WHEELHEAD
Hand feed travel: 7.8″
Auto incremental infeed (NC) 0.0001″ ~ 0.0999″
Handwheel per division: 0.0002″
Handwheel per revolution: 0.08″
Infeed travel: 9.6″
Top slide sliding travel: 7″
Swiveling angle (R&L): 30
Automatic rapid travel: 1.75″
GRINDING WHEEL
Diameter x Width x Bore: 16″ x 2″ x 5″
Wheel speed: 1650 rpm
TABLE
Swivelling angle (R&L): 7 Degrees
Traverse speed (infi variable): 1.2″~275″/min
Handwheel per revolution: 0.39″
WORKHEAD
Swiveling angle (R&L): 90
Center taper: MT4 (option MT5, 5C)
Spindle speed (infi variable): 30~350 rpm
TAILSTOCK
Center taper: MT4 (option MT5)
Quill travel: 1″
INTERNAL GRINDING SPINDLE
Spindle speed:G32P/G38P 12000/18000 rpm or 25000 rpm
Max. grinding bore: 4.33″ or 2.17″
Max. chucking length: 8″~12.4″
Max. chucking diameter: 6″
MOTOR
Wheel spindle motor: 7.5HP(4P)
Workhead motor: 2HP(4P)
Hydraulic pump: 2HP(4P)
Coolant pump: .25HP(2P)
Internal grinding motor: 2HP(2P)
MACHINE
Net weight: 10340 lbs
Gross weight: 11220 lbs
Packing dimension: 119″x90″x79″(L x W x H)
STANDARD FEATURES:
– Mitsubishi PLC control uses a menu-driven
LCD touch screen – it is easy to learn and easy
to set-up. Simply fill in the blanks to set
the total grinding amount, rough increment,
fine increment, spark-out passes, feeding direction,
parking position, and retracting clearance – then
press cycle start to complete an automatic
grinding cycle.
– Heavily ribbed box-type base is made of
Meehanite castings, providing excellent rigidity
to ensure machine stability.
– Hydraulics, coolant and lubrication systems are
separated from machine to eliminate vibration
and dissipate heat.
– Sturdy rigid-designed workhead is
electronically controlled giving variable spindle
speeds ranging from 30-350RPM.
Workhead swivels 90CCW to 90CW for various
grinding operations.
– A dual oil seal and cover prevents coolant seepage
into the workhead.
– The design of the tailstock is both rigid and
robust. Housed in a cast body, the hardened nitralloy
steel sleeve is designed to carry a MT4 center.
– Cartridge type wheel spindle is equipped with four
super precision class 7 (ABEC) bearings incorporated
with 7 1/2 HP spindle motor ensure high accuracy.
– One V and one flat hand-scraped guideways are
Turcite coated and incorporated with an automatic
lubrication system and micro-stepping
motor. Smooth movement of the wheelhead delivers
longer way life with superior positioning accuracy
and repeatability.
– A special upper slide design adds 7″ (180mm)
in total wheelhead travel and increases grinding
capacity.
– Rigid table with box-type structure travels on
a cushion of oil with no metal-to-metal contact.
Table is fully supported in the full
travel to avoid overhang.
– A swiveling table dial indicator enables rapid
cylindricity corrections and taper grinding
applications.
– Slideways, leadscrews are continuously
lubricated by an auto-lube system to ensure
long service life and maintain maximum accuracy.
Equipped With:
– Upgrade from 7.5 H.P. to 10 H.P. Spindle
Motor.
– 20″ Diameter Grinding Wheel, 5″ Bore
– “Babbit” Bearing Spindle in Lieu of
Standard Spindle
– Electronic V/S Control for Wheelhead
– Oil Temperatur Regulator/Cooler Unit
– Auto lube system
– Coolant system
– 8″ Fixed Back Plate
– Standard No. 4 MT Workhead
– Wired Presently for 3/60/230 Volts
Special Note:
Swing Down I.D. Grinding Attachment & I.D. Spindle
are available to purchase for our machine,
from Supertec.
