SUN FIRM MAXTEC CST 42160 – Year 2006
CNC FLATBED Heavy-Duty Lathe 4 Meters
Bed Width 26″
Distance Between Centers 160″
Gap Width 22″
Max Swing Over Bed / Carriage / Gap 42″ / 27″ / 55″
Rapid Traverse Rates (X / Z) 393 / 315 IPM
Spindle Bore 7″
Spindle Motor 35 / 30 HP
Tailstock Taper MT#6
Tools 8
X-Axis Travel 26″
Features:
Fanuc 0i-TC CNC Control
7″ Color LCD
Manual 24″ 4-Jaw Chuck
(8) Position Turret
Manual Tailstock
Chip Conveyor
Spindle Chiller Unit
Manufacturer Catalogue information about
SUN FIRM MAXTEC CST 42 CNC Heavy-Duty Flat Bed Lathe :
CST-Heavy Duty Series
Heavy Duty CNC Lathe
Swing Over Bed : 1070 mm ~ 1270 mm
Distance Between Center : 1000 mm ~ 7000 mm
Bed Width : 665 mm
Spindle Bore : 153 mm ~ 356 mm
| MODEL / ITEM | CST 42 | CST 46 | CST 50 | ||
|---|---|---|---|---|---|
| Capacity | |||||
| Swing over bed | 1070 mm (42″) | 1170 mm (46″) | 1270 mm (50″) | ||
| Swing over cross slide | 680 mm (27″) | 780 mm (31″) | 880 mm (35″) | ||
| Swing over gap | *1400 mm (55″) | *1500 mm (59″) | *1600 mm (63″) | ||
| Width of gap | *560 mm (22″) | ||||
| Distance between center | 1000 mm , 2000 mm , 3000 mm , 4000 mm , 5000 mm , 6000 mm , 7000 mm , 8000 mm , 9000 mm , 10000 mm | ||||
| Headstock | |||||
| Spindle nose | A2-11 / *A2-15, A2-20 | ||||
| Spindle bore | 153 mm (6″) | *230 mm (9″) | *255 mm (10″) | *310 mm (12″) | *356 mm (14″) |
| Range of spindle speed | 1-680 rpm | 1-450 rpm | 1-420 rpm | 1-400 rpm | 1-350 rpm |
| No. of spindle speed | 4 | 2 | |||
| Carriage | |||||
| Cross slide travel (X-axis) | 680 mm (26″) | ||||
| Longitudinal travel (Z-axis) | 1300 mm , 2300 mm , 3300 mm , 4300 mm , 5050 mm , 6050 mm , 7050 mm , 8050 mm , 9050 mm , 10050 mm | ||||
| AC servo motor | X : 3 KW (4 HP) Z : 7 KW (9.4 HP) | ||||
| Rapid feed | X : 10 m/min (393 ipm) Z : 8 m/min (315 ipm) | ||||
| Cutting feed rate | X / Z : 0.001-500 mm/rev (0.0004″-20″/rev) | ||||
| Turret | |||||
| Tool station (Random) available | H4 / *H6 , *V8 | ||||
| Size of external turning | 32×32 mm (1-1/4″x1-1/4″) | ||||
| Boring bar dia. | Ø 50 mm (2″) | ||||
| Tailstock | |||||
| Quill dia | Ø 155 mm (6″) | ||||
| Quill stroke | 250 mm (10″) | ||||
| Taper of center | MT NO.6 | ||||
| Motor | |||||
| Main spindle (continuous) | AC 22 KW (30 HP) | ||||
| Main spindle (30 min. rating) | AC 26 KW (35 HP) | ||||
| Hydraulic pump | 1.5 KW (2 HP) | ||||
| Coolant pump | 0.375 KW (0.5 HP) | ||||
| Bed | |||||
| Width of bed | 665 mm (26″) | ||||
| Control | |||||
| CNC control unit available | FANUC, FAGOR, SIEMENS | ||||
